Benchmark BW Series User Manual

BW SERIES
TABLE OF CONTENTS
1. Safety 1
2. Learn About Your Pressure washer 5
2.1 Component Identification 5
2.2 Assembly Instructions 6
3. Pre-Operation Check 7
3.1 Prepare the Air Filter 7
3.2 Replace the Temporary Pump Oil Dipstick 8
3.3 Check Pump Oil Level 8
3.4 Add Engine Oil 9
3.5 Check the Fuel Level 11
3.6 Check the Cold Water Supply 12
3.7 Assemble the Spray Gun and Hoses 12
4. Starting your Pressure washer 15
4.1 Recoil Start 16
4.2 Stopping the Engine 18
5. Using Your Pressure washer 19
5.1. Using the Spray Wand 19
5.2. Using the Spray Nozzles 20
5.3 Working with Detergents 22
5.4 Pressure Regulator 23
5.5 Carburetor Modification for High Altitude Operation 24
6. Maintenance 25
6.1 Maintenance Schedule 26
6.2 Changing the Engine Oil 27
6.3 Changing the Pump Oil 29
6.4 Cleaning the Air-Filter 30
6.5 Nozzle Cleaning 31
6.6 Cleaning Water Inlet Filter 31
6.7 Spark Plug Service 31
6.8 Spark Arrester Maintenance 32
6.9 Fuel Filter Maintenance 32
6.10 Emission Control System 33
7. Transportation & Storage 35
8. Troubleshooting 38
9. Technical Specifications 40
10. Limited Warranty 41

Benchmark BW Series Specifications

General

Brand	Benchmark
Model	BW Series
Category	Pressure Washer
Language	English