Benchmark BW4400 - Page 35

28
BW SERIES
 Maximum capacity (1.1L)
 SAE10W-30 oil is recommended for general use.
 DO NOT OVERFILL.
Note
 Do not tilt the pressure washer when adding engine oil. This could result
in overfilling and damage to the engine.
 Use high quality engine oil with strong detergents. Using non-detergent
or 2-stroke oil could shorten the engine’s working life.
 Handle and store engine oil with care, avoid getting dirt or dust into the
oil.
 Do not mix dierent engine oils.
 Before the engine oil falls below a safe level, the low oil alert system will
automatically shut o the engine. The low oil light will turn on.
 To avoid the inconvenience of unexpected engine shuto, check the
engine oil level as often as possible.
 Use 4-stroke engine oil, certified to meet or exceed API standard SG, SF,
SAE ratings.
Maximum Oil Level
Minimum Oil Level
0°C
10 20 30 40 50-10-20-30
20
32°F
40 60 80 100 120
°C
°F0-20
15W-50
10W-30
Synthetic 5W-30
5W-30
Effective Viscosity Range of Engine Oils
8.6
8.6.2) Ta
a ft
8.6. 2) Ta ke off the s pa rk a rres te r
a fte r the engine cool down.
8.6. 2) Ta k e off the s pa rk a rres ter from t he
a fter the engine c ool down.
Maximum Oil Level
Minimum Oil Level
0°C
10 20 30 40 50-10-20-30
20
32°F
40 60 80 100 120
°C
°F0-20
15W-50
10W-30
Synthetic 5W-30
5W-30
Effective Viscosity Range of Engine Oils
8. 6
8. 6. 2) Ta
a ft
8. 6.2) Ta k e off the s pa rk a rres te r
a ft e r t he engi ne cool d own.
8. 6. 2) Ta ke off the s pa rk a rre s ter from the
a fte r the eng ine c ool d own .