Benchmark Media Systems, Inc.
Page 5 of 39
FEATURE SUMMARY:
XLR balanced, BNC coaxial, and TOSLINK optical digital inputs – front-panel switch selectable
High level, +4 dBu balanced analog outputs, +29 dBu maximum output level
Jumper-selected 10, 20, or 30 dB pads on balanced outputs
-10 dBV unbalanced outputs, +13.5 dBu maximum output level, factory set to +2vRMS @ 0dBFS (8.2 dBu)
Two HPA2™ high-current, high-output ¼” headphone jacks
Front-panel knob controls all analog outputs or just the headphone outputs (selected with rear-panel switch)
Analog output mute function on rear-panel switch
Preset output levels use multi-turn trimmers – one 10-turn trimmer per output, 20 dB Range, 2 dB/turn
Total jitter immunity with Benchmark, phase-accurate UltraLock™ technology
Two Error LED’s, (no digital input, non-PCM digital input)
Power Indicator LED
THD+N = -107 dB, 0.00045% @ -3 dBFS input, -105 dB, 0.00056% @ 0 dBFS input
Automatic de-emphasis in consumer mode at 44.1, 48, 88.2, or 96 kHz when pre-emphasis bit is set
Reliable and consistent performance under all operating conditions
115 V, 230 V, 50-60 Hz international power supply with very wide operating range
Low radiation toroidal power transformer significantly reduces hum and line related interference
Low power consumption (8 Watts typical program, 16 Watts peak)
Meets FCC Class B and CE emissions requirements
To Next Page
Loading...
Need help?
General