DAC2 Series Instruction Manual Rev C Page 17
Rear Panel
DAC2 HGC and DAC2 L
DAC2 D
Inputs
There are seven stereo inputs on the DAC2:
2 x Analog (DAC2 HGC and DAC2 L model
only), 1 x USB, 2 x Optical, and 2x Coaxial.
These inputs are selected using the front-
panel Input control, or the remote.
The optical and coaxial can decode AES/EBU
and S/PDIF input signals in either professional
or consumer formats.
TIP: The DAC2 will not decode AC3 or
ADAT signals. The ‘Status Display’ will
flash when AC3, ADAT, or other non-PCM
input signals are connected to the
selected digital input.
The Benchmark UltraLock2™ system
removes interface jitter from all digital inputs
To Next Page
Loading...
