DAC2 Series Instruction Manual Rev C Page 61
HPA2
TM
Headphone Outputs (DAC2 HGC and DAC2 D model
only)
Number of Headphone Outputs 2
Output Connectors ¼” TRS with switch on left-hand jack
Output Impedance < 0.11 Ohms
Output Level Control Stereo Control on Front Panel
Output Level Range (at 0 dBFS) into 60-Ohm Load Off to +17 dBu
Maximum Output Current 250 mA
Overload Protection (independent per channel) Current limited at 300 mA, Thermal
Bandwidth > 500 kHz
THD+N -106 dB, 0.0005% into 30 Ohms at
+18 dBu (1.26W)
Status Display
Indicators - Type and Location 16 LED’s on Front Panel
Selection/Status Indication 1 – Dim/Mute
7 – Input
1 – Home Theater Bypass/High
Throughput Mode
1 – Polarity
2 – Word length
4 – Sample Rate
To Next Page
Loading...
