Benchmark DAC2 Series - Balanced Analog Outputs; Unbalanced Analog Outputs

DAC2 Series Instruction Manual Rev C Page 60
Balanced Analog Outputs
Number of Balanced Analog Outputs 2
Output Connector Gold-Pin Neutrik™ male XLR
Output Impedance 60 Ohms (Attenuator off)
425 Ohms (Attenuator = 10 dB)
135 Ohms (Attenuator = 20 dB)
Analog Output Clip Point +30 dBu
Factory Set Home Theater Bypass Level (at 0 dBFS) +13 dBu (Attenuator = 10 dB)
Output Level Range (at 0 dBFS) In ‘Variable’ Mode Off to +23 dBu (Attenuator off)
Off to +13 dBu (Attenuator = 10 dB)
Off to +3 dBu (Attenuator = 20 dB)
Output Level Variation with Sample Rate (44.1 kHz vs.
96 kHz)
< +/- 0.006 dB
Unbalanced Analog Outputs
Number of Unbalanced Analog Outputs 4
Output Connector RCA
Output Impedance 30 Ohms
Analog Output Clip Point +13.5 dBu
Factory Set Home Theater Bypass Output Level (at 0
dBFS)
+7.5 dBu (1.77 Vrms)
Output Level Range (at 0 dBFS) Off to +7.5 dBu
Output Level Variation with Sample Rate (44.1 kHz vs.
96 kHz)
< +/- 0.006 dB