EasyManua.ls Logo

BENDIX EC-60 ABS-ATC STD-PREM CONTROLLERS User Manual

BENDIX EC-60 ABS-ATC STD-PREM CONTROLLERS
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background image
1
SD-13-4863
Bendix
®
EC-60
ABS / ATC Controllers (Standard & Premium Models)
FIGURE 1 - EC-60
CONTROLLERS
Frame and Cab Mount
Standard Frame
Premium Frame
Premium Cab
Standard Cab
INTRODUCTION
Bendix
®
EC-60
controllers are members of a family of electronic
Antilock Braking System (ABS) devices designed to help improve
the braking characteristics of air braked vehicles - including heavy
and medium duty buses, trucks, and tractors. ABS controllers are
also known as Electronic Control Units (ECUs).
Bendix ABS uses wheel speed sensors, ABS modulator valves,
and an ECU to control either four or six wheels of a vehicle. By
monitoring individual wheel turning motion during braking, and
adjusting or pulsing the brake pressure at each wheel, the EC-60
controller is able to optimize slip between the tire and the road
surface. When excessive wheel slip, or wheel lock-up, is detected,
the EC-60
controller will activate the Pressure Modulator Valves to
simulate a driver pumping the brakes. However, the EC-60
controller
is able to pump the brakes on individual wheels (or pairs of wheels),
independently, and with greater speed and accuracy than a driver.
In addition to the ABS function, premium models of the EC-60
controller provide an Automatic Traction Control (ATC) feature.
Bendix ATC can improve vehicle traction during acceleration, and
lateral stability while driving through curves. ATC utilizes Engine
Torque Limiting (ETL) where the ECU communicates with the
engine’s controller and/or Differential Braking (DB) where individual
wheel brake applications are used to improve vehicle traction.
Premium EC-60
controllers have a drag torque control feature
which reduces driven-axle wheel slip (due to driveline inertia) by
communicating with the engine’s controller and increasing the engine
torque.
TABLE OF CONTENTS PAGE
General System Information
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ECU Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
EC-60
Controller Hardware Configurations . . . . 2
EC-60
Controllers with PLC . . . . . . . . . . . . . . . . . 3
EC-60
Controller Inputs . . . . . . . . . . . . . . . . . . . . 3
ABS Off-Road Switch and Indicator Lamp . . . . . . . 4
EC-60
Controller Outputs . . . . . . . . . . . . . . . . . . . 4
Power-Up Sequence . . . . . . . . . . . . . . . . . . . . . . . . 5
ABS Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ATC Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Dynamometer Test Mode . . . . . . . . . . . . . . . . . . . . 8
Automatic Tire Size Calibration . . . . . . . . . . . . . . . 8
ABS Partial Shutdown . . . . . . . . . . . . . . . . . . . . . . . 9
System Reconfiguration
EC-60
Controller System Reconfiguration . . . . 10
Troubleshooting
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Diagnostic Trouble Codes . . . . . . . . . . . . . . . . . .12
Using Hand-Held or PC-based Diagnostics . . .13
Diagnostic Trouble Code Troubleshooting Index .16
Trouble Code Tests . . . . . . . . . . . . . 18 - 27
Connector and Harnesses . . . . . . . . . . . . . . . 28-31
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-34
Wiring Schematics . . . . . . . . . . . . . . . . . . . . . 28-31
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Question and Answer IconNeed help?

Do you have a question about the BENDIX EC-60 ABS-ATC STD-PREM CONTROLLERS and is the answer not in the manual?

BENDIX EC-60 ABS-ATC STD-PREM CONTROLLERS Specifications

General IconGeneral
FunctionAnti-lock Braking System (ABS) and Automatic Traction Control (ATC)
Operating Temperature-40°C to +85°C
TypeABS-ATC Controller
VariantsStandard, Premium
InputsWheel speed sensors
Supply Voltage12V / 24V DC

Summary

Introduction to EC-60™ Controllers

System Components and Mounting

Details the essential components of the ABS/ATC system and guidelines for ECU installation.

ABS and ATC Functional Overviews

Explains the operational principles of the Antilock Brake System (ABS) and Automatic Traction Control (ATC).

Controller Inputs, Outputs, and Configurations

Covers the electrical inputs, outputs, and hardware variations of the EC-60™ controller.

EC-60™ Troubleshooting Procedures

General Maintenance and Troubleshooting Safety

Provides essential safety precautions and general procedures for troubleshooting the EC-60™ system.

Diagnostic Modes and Blink Code Interpretation

Explains how to access diagnostic modes and interpret blink codes for system fault identification.

Using Hand-Held and PC-Based Diagnostic Tools

Details the use of hand-held and PC-based tools for diagnosing EC-60™ system issues.

Troubleshooting Specific Diagnostic Trouble Codes

Provides guides for diagnosing specific trouble codes related to sensors, valves, and system errors.

EC-60™ Wiring and Schematics

Wiring Harness Connectors and Requirements

Covers connector types, part numbers, and best practices for EC-60™ wiring installations.

Wiring Schematics by Vehicle Configuration

Presents detailed wiring diagrams for various EC-60™ controller configurations and mounting types.

Glossary of Technical Terms

Related product manuals