17
Your Action: Reaction of the Bendix
®
Fusion
™
System:
Switch off the cruise
control.
The Active Cruise with Braking (ACB) feature will turn
off; the collision mitigation feature remains active and
ready to intervene. You, the driver, will continue to hear
all alerts as needed.
Set the cruise control
speed.
The Active Cruise with Braking feature is automatically
activated, and your vehicle maintains set speed and
following distance behind the vehicle ahead.
Cover or block the
radar or camera.
The Bendix Fusion system performance will be
diminished, or disabled, when either the radar or the
camera become blocked. An alert will be issued to alert
you of this condition.
Radar: A blocked radar will be indicated through an
alert and will disable all Fusion functions. Camera‑based
functions such as Lane Departure Warning (LDW) will
remain.
Camera: A blocked camera will be indicated through an
alert and will disable all camera‑based functions. The
radar will maintain its function as a Bendix
®
Wingman
®
Advanced
™
system.
Use normal cruise
control “+/‑” switch.
Vehicle speed will be increased (+) or reduced (‑) to
achieve the new set speed, while actively maintaining
the following distance with the vehicle ahead, if one is
present within 328 ft (100 m).
NOTE: The system responses described above are typical but may vary with
different versions of the Fusion system. These represent examples of driver actions
and typical Fusion system responses; however, this chart does not attempt to
cover all possible situations.
To Next Page
Loading...
Need help?
General
