For your safety – pre-operation checks
EN
4
4 - 3
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
• Check operation.
• Correct if necessary.
Brake and clutch
levers
Chassis fasteners
Sidestand
Instruments,
lights,
signals
and switches
ITEM CHECKS
• Check operation of ignition circuit cut-o system.
• If system is not working correctly, have Benelli dealer check vehicle.
Sidestand switch
To Next Page
Loading...
Need help?
General
