Need help?Do you have a question about the Beninca BULL 20HE and is the answer not in the manual?
Provides overall physical dimensions of the product.
Instructions for securing the actuator directly onto an existing concrete base.
Method for installing with height adjustment on an existing concrete base.
Procedure for installing using stretcher bolts into a concrete layer.
Details on adjusting the actuator's height after installation.
Specifics on positioning the limit stop to ensure proper gate stopping.
Provides overall physical dimensions of the product.
Instructions for securing the actuator directly onto an existing concrete base.
Method for installing with height adjustment on an existing concrete base.
Procedure for installing using stretcher bolts into a concrete layer.
Details on adjusting the actuator's height after installation.
Specifics on positioning the limit stop to ensure proper gate stopping.
General| Frequency | 50 Hz |
|---|---|
| Protection Class | IP44 |
| Voltage | 230 V |
| Safety Features | Obstacle detection |
| Power Supply | 230V AC |
| Operating Temperature | -20°C to +50°C |
| Control Type | Remote control |
To Next Page