Need help?Do you have a question about the Beninca BULL 5M.S and is the answer not in the manual?
Guides on positioning and fixing the drive rack to the gate for proper meshing.
Instructions for correctly positioning and securing the foundation plate for the gear motor.
Steps for mounting the motor, including height adjustment and different base types.
Procedure for positioning limit switch brackets to ensure proper gate stopping.
Guidance on fitting magnets to brackets or rack for sensor triggering.
Steps for manually moving the gate during power failure or malfunction.
Overview of wiring connections for the automation system and its components.
Essential safety precautions to follow during gate operation and maintenance.
Instructions for manually operating the gate in case of power failure.
Guidelines for periodic checks, maintenance, and proper disposal of the product.
General| Max Door Weight | 500 kg |
|---|---|
| Protection Level | IP44 |
| Power Supply | 230 Vac |
| Operating Temperature | -20°C to +50°C |
| Speed | 10 m/min |
| Noise Level | ≤ 70 dB |
| Manual Operation | Release key |
To Next Page
