Need help?Do you have a question about the Beninca BULL 424 and is the answer not in the manual?
Details of manufacturer, product compliance with directives, and declaration.
Identification of the legal responsible person for the declaration.
Warnings on intended use, company liability, and manual retention.
Requirements for qualified installers, packaging safety, and electrical precautions.
Welcome to BULL gear motors, product range, and benefits.
Details on BULL 424/624 models, design, materials, and safety mechanisms.
Essential checks for gate and track alignment for proper operation.
Guidance on positioning the foundation plate, including dimensions and cable passage.
Methods for anchoring the foundation plate using screws or cement.
Instructions for fitting nylon and iron racks, including height and backlash.
Centering and securing the gear motor onto the foundation plate.
Adjusting plate height and using optional plates for cable management.
Positioning limit switch brackets and microswitches for correct gate stopping.
Steps for manual gate movement during power failure or malfunction.
Information on wiring, earthing, and a key for system components.
Details on the optional buffer battery kit and its installation.
Rules for safe operation, including gate area and handling malfunctions.
Procedures for manual gate operation and returning to automated mode.
Requirements for regular checks and repairs by qualified personnel.
Guidance on product dismantling and disposal according to regulations.
Terms and conditions related to the product's insurance policy.
Details of manufacturer, product compliance with directives, and declaration.
Identification of the legal responsible person for the declaration.
Warnings on intended use, company liability, and manual retention.
Requirements for qualified installers, packaging safety, and electrical precautions.
Welcome to BULL gear motors, product range, and benefits.
Details on BULL 424/624 models, design, materials, and safety mechanisms.
Essential checks for gate and track alignment for proper operation.
Guidance on positioning the foundation plate, including dimensions and cable passage.
Methods for anchoring the foundation plate using screws or cement.
Instructions for fitting nylon and iron racks, including height and backlash.
Centering and securing the gear motor onto the foundation plate.
Adjusting plate height and using optional plates for cable management.
Positioning limit switch brackets and microswitches for correct gate stopping.
Steps for manual gate movement during power failure or malfunction.
Information on wiring, earthing, and a key for system components.
Details on the optional buffer battery kit and its installation.
Rules for safe operation, including gate area and handling malfunctions.
Procedures for manual gate operation and returning to automated mode.
Requirements for regular checks and repairs by qualified personnel.
Guidance on product dismantling and disposal according to regulations.
Terms and conditions related to the product's insurance policy.
To Next Page
General