Need help?Do you have a question about the Beninca BISON 20 OM and is the answer not in the manual?
Details the physical dimensions of the gear motor assembly for installation planning.
Specifies dimensions and positioning requirements for the foundation plate.
Outlines the procedure for securely mounting the foundation plate.
Describes how to attach the gear motor unit to the installed foundation plate.
Explains how to adjust the vertical position of the gear motor unit.
Details the process of attaching the rack to the gate, ensuring correct meshing.
Guides on correctly positioning limit switch brackets for gate movement control.
Explains how to manually operate the gate in case of power failure or system faults.
Details the mandatory earthing procedure for the automatic system.
Provides a diagram illustrating cable connections for the gear motor and accessories.
Lists essential safety precautions to be observed during gate operation.
Describes the procedure for manually operating the gate in case of power failure.
Provides instructions for the environmentally responsible disposal of the product.
Outlines periodic checks required to ensure the proper functioning of the automation system.
To Next Page
General
