Need help?Do you have a question about the Beninca YAK 20 OM Series and is the answer not in the manual?
Basic product information and overview of its versions.
Guidance for qualified fitters on installation and user instructions.
Crucial safety precautions for product usage and handling.
Essential safety measures for electrical connections and supply.
Instructions for environmentally responsible disposal of the product.
Provides basic product information and overview of its versions.
Technical data and performance characteristics of the YAK 20 OM.
Essential checks on the gate/door before automation installation.
Dimensions of the gear motor for installation planning.
Dimensions for the foundation plate used for mounting.
Detailed steps for securely installing the foundation plate.
Securing the geared motor to the foundation plate.
Instructions for correctly attaching the rack to the gate.
Procedures for manual gate movement during power failure or malfunction.
Correct placement of limit switch brackets for gate stopping.
Information on radio receiver compatibility with ARC transmitters.
Instructions for proper earthing of the system for safety.
Diagram illustrating wiring connections for the motor and accessories.
Overview of the control unit and its terminal functions.
Detailed description of terminal functions for inputs and outputs.
Procedure for setting up the motor stroke and anti-crushing device.
How to access and modify control unit parameters and logic settings.
List and description of adjustable parameters for system behaviour.
Configuration options for enabling or disabling specific operational logics.
Configuration of radio transmitter codes for different functions.
Displays the total count of completed open/close cycles.
Procedure for activating maintenance alerts based on operation cycles.
How to reset the control unit to its default factory settings.
Automatic adjustment of system stroke and torque.
Setting up a password to protect control unit programming.
Anti-crash sensor activation and adjustment with encoder.
Disabling anti-crash sensor when encoder is off.
Procedure for adding new remote transmitter codes to the receiver.
How to check system status and diagnose malfunctions via the display.
Identification and purpose of fuses F1, F2, and F3.
List of error codes and their meanings for troubleshooting.
Requirement to use original accessories for product insurance.
To Next Page
General
