Need help?Do you have a question about the Beninca BULL 8 OM.S and is the answer not in the manual?
General| Max Gate Weight | 800 kg |
|---|---|
| Protection Rating | IP44 |
| Pinion module | 4 |
| Voltage | 230 V |
| Gear Type | Worm gear |
| Power Supply | 230 Vac 50 Hz |
| Operating Temperature | -20°C / +50°C |
| Limit switch type | Mechanical |
| Control Options | Remote control |
General introduction to the BULL gear motor and Benincà's offerings.
Overview of BULL automatic systems and their features.
Technical specifications of BULL 5M, 8M, and 80M models.
Describes how to position and fix the rack to the gate.
Details on setting the foundation plate dimensions and alignment.
Explains how to adjust the motor height using dowels.
Guide to positioning limit switch brackets for gate stopping.
Instructions for fitting magnets for sensor triggering.
Procedure for manual gate movement during power failure.
Reference to wiring connections and control unit instructions.
Important safety precautions for using the gate automation system.
Steps for manually operating the gate in case of power failure.
Guidelines for regular checks and maintenance of the system.
Instructions for correct and environmentally friendly disposal of the product.
To Next Page
