in memory in the “name” eld. In the “number” eld, instead, it is possible to choose whether to enter
“0” (in this case, the number will acquire default presetting and permitted access) or the 6-digit string of
presetting (se following section).
- Sending of a command through SMS:
proceed for all the other commands by sending the SMS to the module with the following command:
addnum 112233 +NN3391234567,n°2,n°3,n°4...
where:
addnum command string
112233 access password
+NN3391234567 telephone number to be added to the list
n°2,n°3,n°4 if more than one number are to be inserted with one single message, it is
sufcient to divide them with “,”
N.B.:
- When a number is stored in memory via SMS, it acquires the default permitted access and presetting
(see section “operation”). To modify these permitted accesses, see command “modnum”
- To allow for the correct operation of the phone call, the telephone must not have the function “hide
number” activated.
If a reply should be sent by the device, the command must be:
?addnum 112233 +NN3391234567;n°2;n°3;n°4
The reply will be : “USER ADDED”
4) HOW TO MODIFY THE PERMITTED ACCESS OF ONE OR MORE NUMBERS:
This command permits to modify the permitted access and presetting of one or more mobile phone num-
bers, or it permits or denies the possibility to activate some channels, change the combination call/channel
to be activated, call in the event of alarm.
modnum 112233 000000 +NN3391234567,n°2,n°3,n°4...
where:
modnum command string
112233 access password
000000 string regarding channel presetting and permitted accesses to channels *
+NN3391234567 enter the number the permitted access of which should be modied
n°2,n°3,n°4 more than one number can be modied by dividing them with “,”
* the string regarding channel presetting and permitted accesses to channels is composed of 6 digits:
Digit 1: alarm presetting:
“0” = the number will not be informed in case of alarm
“1” = the number will be informed in case of alarm
Digit 2: activation with phone call:
“0” = denied access (the phone call activates no channel)
“1” = the phone call activates channel 1
“2” = the phone call activates channel 2
“3” = the phone call activates channel 3
“4” = the phone call activates channel 4
Digit 3: activation of channel 1 by SMS:
“0” = denied access (channel 1 cannot be activated through SMS)
“1” = channel 1 can be activated (through the sending of SMS1)
Digit 4: activation of channel 2 by SMS:
“0” = the phone call activates channel (channel 2 cannot be activated through SMS)
“1” = channel 2 can be activated ( (through the sending of SMS2)
Digit 5: activation of channel 3 by SMS:
“0” = denied access (channel 3 cannot be activated through SMS)
“1” = channel 3 can be activated (through the sending of SMS3)
Digit 6: activation of channel 4 by SMS:
“0” = denied access (channel 4 cannot be activated through SMS)
“1” = channel 4 can be activated (through the sending of SMS4)
6
To Next Page
Loading...
Need help?
General
