EasyManuals Logo

Beninca CALL Manual

Beninca CALL
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
If a number, which was not previously memorised, is entered in among the numbers typed in the odnum
command, this number will be added to the list with presetting and permitted access indicated in the com-
mand.
If a reply should be sent by the device, the command shall be:
?modnum 112233 000000 +NN3391234567,n°2,n°3,n°4
The reply will be : “CONFIGURATION UPDATE OK”
5) STATUS REQUEST OF PRESETTING AND PERMITTED ACCESSES OF A NUMBER:
This command allows to know presetting (presetting of alarm and channel to be activated by phone call)
and permitted accesses (channels which can be activated by SMS) regarding one specic number stored
in memory.
numstatus 112233 +NN3391234567
where:
numstatus command string
112233 access password
+NN3391234567 telephone number to be added to the list
REPLY:
ALLARM:ON/OFF,CALL:1/2/3/4,ch1:ON/OFF,ch2:ON/OFF,ch3:ON/OFF,ch4:ON/OFF
where:
ALLARM:ON/OFF notice of activated/deactivated alarm
CALL:1/2/3/4 number showing the channel which can be activated by phone call
ch1:ON/OFF activation status of channel 1 by SMS
ch2:ON/OFF activation status of channel 2 by SMS
ch3:ON/OFF activation status of channel 3 by SMS
ch4:ON/OFF activation status of channel 4 by SMS
6) REMOVE USER FROM LIST OF ENABLED PHONES:
This command permits to remove one or more numbers from memory.
delnum 112233 +NN3391234567,n°2,n°3,n°4...
where:
delnum command string
112233 access password
+NN3391234567 telephone number to be removed from list
n°2,n°3,n°4 more than one number can be modied by dividing them with “,”
If a reply should be sent by the device, the command shall be:
?delnum 112233 +NN3391234567;n°2;n°3;n°4
The reply will be: “USER DELETED”
7) READ LIST OF ENABLED PHONES:
This command permits to know the number of memorised phone numbers.
readbook 112233
where:
readbook command string
112233 access password
REPLY:
n°1;n°2;n°3;
8) RESET OF SENT SMS COUNTER:
This command permits to reset the counter of SMS sent by the CALL device. This counter can be useful to
count the messages sent since the last recharge made in order to estimate the remaining credit.
smsreset 112233
where:
smsreset command string
112233 access password
6
7
www.gałecki.pl

Other manuals for Beninca CALL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beninca CALL and is the answer not in the manual?

Beninca CALL Specifications

General IconGeneral
BrandBeninca
ModelCALL
CategoryReceiver
LanguageEnglish

Related product manuals