Beninca TO.GO 2A - Battery Replacement

9
BATTERY REPLACEMENT
If during normal operation, the LED ashes by pressing any button, the battery is low and needs to be replaced.
To replace the battery, open the battery lid using a screwdriver as shown in the picture, by lightly pressing on both slits.
Replace the battery following the polarity, the symbol +is indicated in the printed circuit board.
TO.GO
HAPPY
WARNING!:
Batteries are special waste and must be disposed of in compliance with the regulations in force.
1
2
V
+
ALCALINE A23
>
+
1
2
V
ALCALINE A23