Beninca TO.GO 4VA User Manual

PROGRAMMING GUIDE
TO.GO 2A
TO.GO 4A
TO.GO 2VA
TO.GO 4VA
TO.GO 2AS
TO.GO 4AS
TO.GO 2AK
TO.GO 4AK
TO.GO 4ASE TO.GO 2QV
HAPPY 2VA
HAPPY 4VA
HAPPY 2AK
HAPPY 4AK
IRI.TX4VA IRI.TX4AK

Beninca TO.GO 4VA Specifications

General

Type	Remote Control
Channels	4
Frequency	433.92 MHz
Dimensions	120 x 40 x 20 mm
Number of buttons	4
Coding Type	Fixed Code
Range	Up to 100 m

Summary

ADVANCED ROLLING-CODE (ARC) 128 BIT

TECHNICAL SPECIFICATIONS

Technical specifications for various transmitter models including power, battery life, radio encoding, frequency, and size.

IRI.TX - MODELS AND SPECIFICATIONS

THE RECEIVERS

EEPROM

STORING OF TRANSMITTERS

BOX RECEIVER (ONE.2WB/ONE.2WO AND EARLIER VERSIONS)

Instructions for storing transmitters on box receivers (ONE.2WB), detailing LED indicators and button presses for channel 1 and 2.

PLUG-IN RECEIVER (ONE. 2WI AND EARLIER VERSIONS)

Instructions for storing transmitters on plug-in receivers (ONE.2WI), detailing LED indicators and button presses for channel 1 and 2.

CONTROL UNITS WITH BUILT-IN RADIO AND LEARNING BUTTON

CONTROL UNITS WITH BUILT-IN RADIO CONTROL AND LCD DISPLAY

ADVANCED FUNCTIONS

SELECTION OF THE TYPE OF ENCODING (TO. GO/HAPPY VA)

Describes how to modify the code type (ARC/HCS) on TO.GO/HAPPY VA transmitters using button combinations.

SELECTION OF THE TYPE OF ENCODING (IRI.TX VA)

Explains how to change the encoding type (ARC/HCS) for IRI.TX VA transmitters via button presses and LED feedback.

REMOTE LEARNING

Remote Learning In Receivers One WB/WI

Step-by-step guide for remote learning transmitters with WB/WI receivers, using the hidden key of a saved transmitter.

Remote Learning In Receivers Built Into The Control Units

Instructions for remote learning transmitters into control units, using the hidden key of a previously memorized transmitter.

TRANSMITTER CLONING

Quick cloning

Advanced cloning

BATTERY REPLACEMENT