BenQ DC 3400 User’s Manual
17
Formatting Memory
Formatting an inserted SD card completely erases the memory’s contents and
prepares it for use. You must format an SD card if you are using it with the DC 3400
for the first time.
1. Enter the setup menu and press to select the Copy/Format menu icon.
2. To format the contents of memory, select the “Format Memory” icon and
press the Set button.
3. Use and to select “Yes” or “No” and press the Set button to confirm
your selection. Press the Menu button to cancel and return to the Setup
menu
Resetting File Names
All still images movie clips are given file names that follow the format
“IMG_xxxx.yyy” where “xxxx” is a number from 0001 to 9999 and “yyy” is the file
format (JPG, WAV or AVI). The file number is incremented automatically by the
camera. Reset this number to “0001” (or the next available number) as follows
1. Enter the setup menu and press to select the Reset Filename menu
icon.
2. Press the Set button and use and to select “Yes” or “No”. Press the
Set button to confirm your selection or press the Menu button to can-
cel and return to the Setup menu.
Setting the Date and Time
Because date and time are stored as metadata with each file recorded by the DC
3400, it is important to set this properly.
1. Enter the setup menu and press to select the Set Date and Time menu
icon.
2. Press the Set button.
3. Use and to navigate between year, month, date, hour and minute set-
ting. Press and to adjust the values for each.
4. Press the Set button or the Menu button to confirm your changes
and return to the Setup menu.
SET
SET
MENU
SET
SET MENU
SET
SET MENU
To Next Page
Loading...
Need help?
General
