What to do if the battery power is draining quickly on my BenQ DC X720?
If the battery power on your BenQ Digital Camera is draining quickly, it may be because the battery was not fully charged or it has not been used for an extended period after being charged. To resolve this, fully charge the battery and discharge it for at least one complete cycle before use.
Why won't my BenQ DC X720 Digital Camera power up?
If your BenQ Digital Camera won't power up, it could be due to the following reasons: * There is no battery or the battery is not inserted correctly. Insert the battery correctly. * The battery has no power. Recharge the battery.
What to do if my BenQ DC X720 Digital Camera does not shoot when pressing the shutter button?
If your BenQ Digital Camera isn't shooting when you press the shutter button, there are several possible reasons: * The battery may be running low, so recharge it. * The camera might not be in Shooting Mode, so switch to it. * Ensure you press the shutter button all the way down. * The memory card or internal memory might be full, so load a new card or delete unwanted files. * The flash could be recharging; wait until the flash mode icon stops flashing. * The camera may not recognize the memory card; format the memory card before initial use or before using it with another camera.
Why I cannot download images from my BenQ DC X720?
If you cannot download images from your BenQ Digital Camera, it could be due to the following reasons: * Your computer's hard disk might not have enough free space. Ensure that the hard disk has enough space for running Windows and that the drive for loading image files has free space equal to or greater than the memory card in the camera. * There might be no power being supplied to the camera. Recharge the battery.
What to do if I cannot format a memory card in my BenQ Digital Camera?
If you cannot format a memory card in your BenQ Digital Camera, it may be because the memory card is write-protected. Remove the write protection. Alternatively, it could be the end of the memory card's life, in which case you should insert a new memory card.
What to do if my BenQ DC X720 Digital Camera image is too bright or too dark?
If the image from your BenQ Digital Camera is too bright or too dark, it's likely that the exposure is excessive or inadequate. Reset exposure compensation to correct this.
What to do if even though the flash fired, the image from my BenQ DC X720 Digital Camera is dark?
If the image from your BenQ Digital Camera is dark even though the flash fired, it means that the distance to the subject is greater than the flash’s effective range. Get closer to the subject and shoot.
How to play back video clips on BenQ DC X720 Digital Camera if Windows Media Player doesn't work?
If you cannot play back video clips from your BenQ Digital Camera using Windows Media Player, it is likely that the MPEG-4 video compression method is in Xvid format and the Xvid codec has not been installed. Make sure you are using Windows Media Player 9.0 (or above). Be sure to install the free MPEG-4 codec driver in advance, available from bundle software or Xvid web site: http://www.xvidmovies.com.
General| Brand | BenQ |
|---|---|
| Model | DC X720 |
| Category | Digital Camera |
| Language | English |
Instructions on how to properly insert and secure the rechargeable lithium-ion battery into the camera.
Steps for charging the camera's battery using the provided charger for optimal performance.
Viewing, managing, and editing captured images and video clips.
Connecting the camera to a computer via USB for file transfer.
To Next Page
