BenQ DC 3400 User’s Manual
23
APPENDIX
Warning/Error Messages and Codes
Note: If you cannot turn the digital camera off with power button, please press
Shutter and Set button at the same time to force off.
Message Cause Solution
Card Full There is insufficient card mem-
ory capacity to store an image.
Delete the stored image(s)
in the memory card or insert
a new memory card. See
page 14 and page 4.
Card Lock The SD card is locked. Switch the card lock to the
unlock position.
Card Error The SD card is corrupted. Purchase a new SD card.
System Error
There is a general system
error.
Turn the camera off and on
and try again.
Format Error Formatting has failed. Turn the camera off and on
and try again (006), or pur
-
chase a new SD card (004).
File Error The file is corrupted. Delete this image (page 14)
and take the picture again.
Image Locked The image can’t be deleted
when it is locked.
Unlock the protected image.
See
page 14.
Lens Cover Closed The lens cover is closed. Open the lens cover before
taking pictures.
Error Code Error Type
0000~0010 System Error
0000~0110 Storage Error
0200~0210 File Error
To Next Page
Loading...
Need help?
General
