BenQ DC C850 - User Manual

Other manuals for BenQ DC C850

Questions and Answers

J
Jesus JenkinsSep 8, 2025
Why is my BenQ DC C850 not taking pictures even when I press the shutter button?
- O
  oreidSep 8, 2025
  There are several reasons why your BenQ Digital Camera might not be shooting even when you press the shutter button. Here's what to check: * Ensure the battery isn't low by recharging or replacing it with new ones. * Make sure the camera is in capture mode. * Press the shutter button all the way down. * If the internal memory or memory card is full, load a new card or delete unwanted files. * If the flash is recharging, wait until the flash mode icon stops flashing. * If the camera doesn't recognize the memory card, format it before use.
G
Grace ThomasSep 7, 2025
How to fix a memory error on my BenQ DC C850?
- S
  Sean Schultz MDSep 7, 2025
  If you're getting a memory error on your BenQ Digital Camera, the memory card may not be formatted correctly. Re-format the memory card to the FAT16 format using a card reader in Windows.
A
Andre LeeAug 22, 2025
Why does the battery on my BenQ Digital Camera drain so fast?
- M
  maryweaverAug 22, 2025
  If your BenQ Digital Camera's battery is draining quickly, it might be because a rechargeable battery was not fully charged or hasn't been used for a long time after being charged. Fully charge the battery and discharge it for at least one complete cycle before use.
E
Edward EvansSep 4, 2025
How to fix color issues in photos taken with my BenQ DC C850 Digital Camera?
- M
  Mitchell SanfordSep 4, 2025
  If the colors in your BenQ Digital Camera images aren't showing up properly, it's likely that the White Balance wasn't set correctly when you took the pictures. Select a suitable White Balance setting before taking each picture.
K
Kristen MendezSep 3, 2025
Why can't I format a memory card in my BenQ DC C850 Digital Camera?
- G
  gatesdavidSep 3, 2025
  If you can't format a memory card in your BenQ Digital Camera: * The memory card may be write-protected. Remove the write protection. * The memory card may have reached the end of its life. Insert a new memory card.
D
Dawn CastilloSep 1, 2025
What to do if images are dark even when the flash fires on my BenQ DC C850 Digital Camera?
- R
  Ricky GallagherSep 2, 2025
  If your BenQ Digital Camera's flash fires but the image is still dark, it means the subject is too far away. Get closer to the subject and try shooting again.
J
josephwatsonAug 31, 2025
Why does the flash not work on my BenQ Digital Camera?
- K
  kellikingAug 31, 2025
  If the flash on your BenQ Digital Camera isn't firing or recharging, the camera flash might be turned off. Set the flash to Auto Flash.
E
Elizabeth ValenciaAug 30, 2025
How to fix images that are too bright or dark on my BenQ Digital Camera?
- J
  James OrrAug 30, 2025
  If your images from the BenQ Digital Camera are too bright or too dark, it's likely that the exposure is excessive or inadequate. Reset the exposure compensation to correct this.
C
Cheryl GarciaAug 29, 2025
What to do if I cannot download images from my BenQ DC C850?
- M
  Monique BerryAug 29, 2025
  If you're having trouble downloading images from your BenQ Digital Camera, it could be due to: * Insufficient free space on your computer's hard drive. Ensure your hard disk has enough space for Windows and that the drive for loading image files has free space equal to or greater than the memory card in the camera. * No power being supplied to the camera. Recharge or replace the batteries.
P
Paul MillerAug 27, 2025
Why won't my BenQ DC C850 turn on?
- T
  Timothy PadillaAug 27, 2025
  Your BenQ Digital Camera might not be powering on because: * There is no battery or the battery is not inserted correctly. Make sure to insert the battery correctly. * The battery has no power. If this is the case, replace it with new batteries.