BenQ G922HD User Manual

1
Applicable Country & Regions: China
Service Manual for BenQ:
LCD G922HD
(D-SUB+DVI+ Silver Black/
Black Bezel)
Product Service Manual – Level 1~2
Version: 1st
Date:04-16-2009
Notice:
For RO to input specific “Legal Requirement” in specific NS regarding to responsibility and
liability statements.
Please check BenQ’s eSupport web site, http://esupport.benq.com
, to ensure that you have the
most recent version of this manual.
First Edition (April, 2009)
©
Copyright BenQ Corporation 2009. All Right Reserved.

BenQ G922HD Specifications

General

Screen Size	18.5 inches
Resolution	1366 x 768
Panel Type	TN
Brightness	200 cd/m²
Response Time	5 ms
Connectivity	VGA
Aspect Ratio	16:9
Viewing Angles	170°/160°
Power Consumption	22W (typical)

Summary

About This Manual

Important Safety & Training

General safety and training advice for service personnel.

Introduction and Compliance

RoHS Compliance Requirements

Safety Precautions

Precautions for safe operation and maintenance of the product.

Product Overview and Specifications

Level 1 Service: Cosmetic & Alignment

Software/Firmware Upgrade

Step-by-step instructions for updating the monitor's software or firmware.

DDC Interface Operations

DDC Data Re-programming

Procedures for reprogramming DDC data, including necessary tools and steps.

Picture Adjustment and Alignment

Adjusting the Picture via OSD

Factory OSD Menu Access

Level 2 Service: Component Replacement

Product Disassembly Guide

Step-by-step guide for disassembling the monitor.

Troubleshooting Guide

Required Tools and Equipment