To Next PageTo Next Page
Need help?Do you have a question about the BenQ G900WA and is the answer not in the manual?
General| Pixel pitch | 0.283 x 0.283 mm |
|---|---|
| Display diagonal | 19 \ |
| Display resolution | 1400 x 900 pixels |
| Vertical scan range | 55 - 76 Hz |
| Horizontal scan range | 31 - 83 kHz |
| Contrast ratio (typical) | 800:1 |
| Viewing angle, horizontal | 160 ° |
| Display brightness (typical) | 300 cd/m² |
| Bandwidth | 0.135 GHz |
| Display viewable area (HxV) | 408.2 x 255.1 mm |
| Cable lock slot | Yes |
| Tilt angle range | -5 - 20 ° |
| Cable lock slot type | Kensington |
| Panel mounting interface | 100 x 100 mm |
| Power consumption (typical) | 40 W |
| Sustainability certificates | ENERGY STAR |
| Safety | TCO'03 |
| Market positioning | - |
Weight and Dimensions| Depth (without stand) | 365.7 mm |
|---|---|
| Width (without stand) | 441.3 mm |
| Height (without stand) | 165 mm |
| Weight (without stand) | 3730 g |
Details the Restriction of the Use of Certain Hazardous Substances directive for electronic equipment.
Provides essential safety warnings, FCC compliance, and power safety guidelines for operation.
Outlines the monitor's key features, functions, and general capabilities.
Covers important precautions for monitor placement, power connection, and safe handling.
Lists detailed technical specifications for the LCD panel, input, and performance metrics.
Details the pinout configuration for the standard VGA input signal connector.
Lists supported display resolutions with corresponding horizontal and vertical timing parameters.
Provides comprehensive technical specifications for the LCD panel, including size, resolution, and pixel pitch.
Shows dimensional views of the monitor from the front, side, and back.
Illustrates the monitor's internal components and their assembly order for service.
Provides step-by-step instructions on how to safely take apart the monitor.
Details the procedure for updating the monitor's internal software or firmware.
Explains how to adjust picture settings and calibrate the display using the OSD menu.
Shows the block diagram of the monitor's main board circuitry.
Lists common problems with their potential solutions and diagnostic checks.
Explains the fundamental principles and theories behind the monitor's electronic circuits.
Lists all components used in the monitor, along with their part numbers and descriptions.
