Name: BenQ GW2255H
Brand: BenQ
Rating: 4 (1 reviews)

To Next Page

To Previous Page

24 How to assemble your monitor hardware (for models without height adjustment stand)

How to detach the stand and the base

1. Prepare the monitor and area.

Turn off the monitor and the power before unplugging

the power cable. Turn off the computer before

unplugging the monitor signal cable.

Protect the monitor and screen by clearing a flat open

area on your desk and placing a soft item like a towel on

the desk for padding, before laying the screen face down

on a flat clean padded surface.

Please be careful to prevent damage to the monitor. Placing

the screen surface on an object like a stapler or a mouse will

crack the glass or damage the LCD substrate voiding your

warranty. Sliding or scraping the monitor around on your

desk will scratch or damage the monitor surround and

controls.

2. Remove the monitor stand.

Push down the stand gently until you cannot go further

so you can see the release button clearly.

Insert a pointed object such as a screwdriver to the

hole above the monitor stand arm, and then push the

screwdriver against the release button inside the hole.

Then pull the monitor stand backward away from the

monitor.

Release button

https://tm.by

Интернет-магазин TM.by

Questions and Answers:

Need help?

Do you have a question about the BenQ GW2255H and is the answer not in the manual?

BenQ GW2255H Specifications

General