Name: BenQ GW2760HS
Brand: BenQ
Rating: 4 (1 reviews)

To Next Page

To Previous Page

12 How to assemble your monitor hardware

How to detach the stand and the base

1. Prepare the monitor and area.

Turn off the monitor and the power before unplugging

the power cable. Turn off the computer before

unplugging the monitor signal cable.

Protect the monitor and screen by clearing a flat open

area on your desk and placing a soft item like a towel on

the desk for padding, before laying the screen face down

on a flat clean padded surface.

Please be careful to prevent damage to the monitor. Placing

the screen surface on an object like a stapler or a mouse will

crack the glass or damage the LCD substrate voiding your

warranty. Sliding or scraping the monitor around on your

desk will scratch or damage the monitor surround and

controls.

2. Remove the monitor base.

Release the thumbscrew on the bottom of the monitor

base and detach the monitor base as illustrated.

3. Remove the monitor stand.

Release the screw that fixes the stand to the monitor.

Use of a flat-head screwdriver is recommended. Then

pull the monitor stand backward away from the

monitor.

Other manuals for BenQ GW2760HS

Questions and Answers:

Need help?

Do you have a question about the BenQ GW2760HS and is the answer not in the manual?

General