What to do if my BenQ Digital projectors shows no picture?
If your BenQ digital projector isn't displaying a picture, make sure the video source is turned on and properly connected. Also, verify that the projector is correctly connected to the input source device. Ensure you've selected the correct source using the SOURCE key on the projector or remote control.
How to fix BenQ HT2050 that won't turn on?
If your BenQ digital projector does not turn on, ensure the power cable is securely plugged into both the projector's AC inlet and a functioning power outlet, and that the power outlet switch is on. Also, if the projector is cooling down, wait until the process is complete before attempting to turn it on again. Finally, check that the lamp cover is correctly and securely attached.
Why is my BenQ Digital projectors remote control not working?
If the remote control for your BenQ digital projector isn't working, first replace the batteries with new ones. If that doesn't work, make sure there's nothing blocking the path between the remote and the projector. Finally, ensure you're within 8 meters (26.2 feet) of the projector.
How to fix blurred picture on BenQ HT2050?
If the picture from your BenQ digital projector is blurred, start by adjusting the focus of the lens using the focus ring. If the issue persists, check that the projector and screen are properly aligned, adjusting the projection angle, direction, and height as needed. Also, make sure to remove the lens cover.
What to do if 3D content isn't displaying correctly on BenQ HT2050 Digital projectors?
If the 3D content on your BenQ digital projector isn't displaying correctly, first recharge the 3D glasses. Next, verify that the settings in the 3D menu are correctly configured. Ensure you are using a 3D Blu-ray Disc. Finally, confirm that the correct input source has been selected using the SOURCE key on the projector or remote control.
Why is the image unstable on my BenQ HT2050?
If the image from your BenQ digital projector is unstable, check that the connection cables are securely connected to both the projector and the signal source. Correctly connect the cables to the appropriate terminals.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Vertical scan range | 23 - 120 Hz |
| Horizontal scan range | 23 - 120 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 15000:1 |
| Screen size compatibility | 60 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, horizontal | ±40 ° |
| Throw ratio | 1.15 - 1.5 |
| Focal length range | 16.88 - 21.88 mm |
| Aperture range (F-F) | 2.59 - 2.87 |
| Lamp power | 240 W |
| Light source type | Lamp |
| Service life of light source | 3500 h |
| Service life of light source (economic mode) | 5000 h |
| 3D | Yes |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 640 x 480 (VGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA) |
| DVI port | No |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| Number of bulbs | 1 bulb(s) |
| Card reader integrated | - |
| Noise level | 29 dB |
| Noise level (economic mode) | 27 dB |
| On Screen Display (OSD) languages | ARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR |
| Remote control type | IR |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 353 W |
| Power consumption (PowerSave) | 292 W |
| Placement | Wall |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Home cinema |
| RMS rated power | 10 W |
Weight and Dimensions| Depth | 277 mm |
|---|---|
| Width | 380.5 mm |
| Height | 121.7 mm |
| Weight | 3300 g |
Guidelines for safe operation, level placement, and avoiding tilt.
Avoids operating in poorly ventilated, high-temperature, or dusty environments.
Ensures proper ventilation, stable power, and protection from liquids.
Advises against direct lens viewing and proper lamp cooling.
Safety for ceiling mounting, internal high voltages, and professional servicing.
Managing moisture, avoiding chemicals, and proper product disposal.
Highlights key features like Full HD compatibility, high picture quality, and 3D function.
Lists common accessories included with the projector.
Lists optional accessories available for purchase.
Identifies controls and ports on the front and top of the projector.
Identifies controls and ports on the rear and bottom of the projector.
Details the function of each button on the projector's control panel.
Explains the purpose of each button on the remote control.
Describes functions like LED backlight, AUTO, ECO BLANK, SOURCE.
Instructions for installing batteries and safety warnings for handling them.
Specifies the optimal distance and angle for remote control operation.
Factors to consider and methods for installing the projector.
Provides a table to determine projection distance based on screen size.
Step-by-step guide on how to adjust the vertical lens shift.
General advice for connecting various equipment to the projector.
Illustrates how to connect computers and A/V devices.
How to connect HDMI devices for high-quality video and audio.
Connecting component video devices using RCA cables.
Connecting composite video devices with a composite cable.
How to connect a computer using a VGA cable and audio cable.
Step-by-step guide to power on and initiate the projector.
Guides through initial settings like Projector Position and OSD Language.
Setting vertical keystone correction and auto source detection.
Choosing between Basic and Advanced OSD menu types.
Instructions for safely shutting down the projector and cooling the lamp.
How to use a Kensington lock to prevent theft.
Steps to set a six-digit password for projector access.
How to retrieve a forgotten password using a recall code.
Process for modifying the existing projector password.
Steps to turn off the password protection feature.
How to choose the active video or computer input signal.
Customizing the names of connected input sources.
Using projector feet to set the projection angle and height.
Using the AUTO function to optimize PC signal image quality.
Adjusting image size with zoom and focus rings.
How to correct trapezoidal distortion using controls.
Primary functions available in the Basic OSD menu.
Full range of functions available in the Advanced OSD menu.
Instructions to switch from Basic to Advanced OSD menu.
Instructions to switch from Advanced to Basic OSD menu.
Selecting preset picture modes like Bright, Vivid, Cinema, Game, 3D.
Adjusting audio output using MaxxAudio technology presets.
Controls for audio volume, muting, and power on/off ring tone.
Settings for 3D content viewing and image synchronization.
Adjusting wall color, image position, test pattern, and auto source.
Switching OSD types and configuring HDMI signal format.
Resetting lamp usage time and restoring factory default settings.
Viewing projector status like source, resolution, and firmware.
Settings accessible when no video signal is connected, like Wall Color and Test Pattern.
Overview of the main menus within the Advanced OSD interface.
Selecting preset picture modes and user-defined modes.
Loading settings from presets or renaming custom user modes.
Adjusting basic picture parameters like brightness, contrast, saturation, and hue.
Fine-tuning picture sharpness and color temperature settings.
Adjusting lamp power modes and black level.
Optimizing gamma for lighting and enabling Brilliant Color.
Manually adjusting Red, Green, and Blue gain/offset for color.
Detailed adjustment of primary colors (hue, saturation, gain).
Reducing video noise and enhancing composite video quality.
Selecting sound modes and customizing EQ for user-defined audio.
Controls for audio volume, muting, and power on/off ring tone.
Restoring audio settings to factory defaults.
Adjusting how the image fits the screen (Auto, 4:3, 16:9, Wide, Letter Box).
Correcting color for non-white surfaces and adjusting image position.
Concealing picture quality issues at the edges of the display.
Adjusting horizontal size and phase for PC/Component signals.
Configuring 3D mode and sync for optimal 3D content display.
Setting OSD language, background, and startup logo.
Configuring installation position, auto shut-off, and direct power features.
Customizing OSD display time, renaming sources, and auto source search.
Managing lamp timer, lamp hour, and HDMI settings (Format, CEC).
Configuring serial communication, test patterns, and closed captions.
Adjusting the projector's cooling time after operation.
Adjusting for high altitude and managing password security.
Locking control keys and configuring LED indicator behavior.
Restoring factory settings and ISF calibration information.
Viewing current signal source, picture mode, resolution, and firmware.
Detailed options within the Picture menu.
Detailed options within the Audio Setup menu.
Detailed options within the Display menu.
Options in the Basic System Setup menu.
Options in the Advanced System Setup menu.
Options in the Information menu.
Instructions for cleaning the projector lens safely.
How to clean the projector's exterior casing.
Guidelines for proper storage and transportation of the projector.
How to check the projector's lamp usage time.
Settings to maximize the projector lamp's lifespan.
Adjusting lamp power to Normal, Economic, or SmartEco modes.
Configuring projector to turn off automatically after inactivity.
Understanding messages indicating the need to replace the lamp.
Crucial safety steps before and during lamp replacement.
Step-by-step instructions for removing the old lamp.
Procedures for installing the new lamp and securing it.
Steps after lamp installation, including cover replacement and restart.
Explains the meaning of different indicator light combinations.
Interpreting indicators for lamp and thermal errors.
Explains indicators for fan errors and over-temperature conditions.
Solutions for the projector not turning on or displaying an image.
How to resolve unstable or blurred projected images.
Troubleshooting problems with the remote control and 3D content.
Details on resolution, lamp, power supply, and consumption.
Information on weight, output terminals, and control interfaces.
Operating temperature, humidity, and altitude limits.
Overall width, depth, and height of the projector.
Details on ceiling mount screws (M4 size, length).
Supported PC input formats, resolutions, refresh rates, and frequencies.
Lists various PC input timings and their specifications.
Supported resolutions, refresh rates, and frequencies for HDMI input.
Lists various HDMI input timings and their specifications.
Supported EDTV/HDTV formats and timings via component inputs.
Supported NTSC, PAL, SECAM video formats and their timings.
Details of the projector's warranty coverage and exclusions.
Copyright notice and legal disclaimer for the manual's content.
To Next Page
