BenQ LK935 - Page 47

47 Menu operation
Standby Settings
• Standby Mode
• Eco: The projector maintains at normal standby mode with less than
0.5W power consumption.
• Network: The projector maintains at network standby mode with less
than 2W power consumption.
• Normal: Allows the projector to provide network, monitor out and
audio pass through functions in standby mode.
• Auto Disable Network Standby Mode
Allows the projector to disable the network function after a set period of
time after it enters standby mode. For instance, if 20 min is selected, the
projector is able to provide the network function for 20 minutes after it
enters standby mode. When 20 minutes is up, the projector enters normal
standby mode.
• Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press / to
choose the source that you wish to use. See Connection on page 18 for
how to make the connection.
Operation
Settings
• Reminder Message
Sets the reminder messages on or off.
• LED Indicator
You can turn off the LED warning lights. This is to avoid any light
disturbance when viewing images in a dark room.
• Power On/Off Settings
• Auto Power Off: Allows the projector to turn off automatically if no
input signal is detected after a set period of time to prevent
unnecessary waste of light source life.
• Direct Power On: Allows the projector to turn on automatically once
the power is fed through the power cord.
• Signal Power On: Sets whether to turn the projector directly on
without pressing POWER or ON when the projector is in
standby mode and detects a HDMI or DisplayPort signal.