BenQ LW600ST+ - Page 37

37 Menu operation
Display
Aspect Ratio
There are several options to set the image's aspect ratio depending on your
input signal source.
• Auto: Scales an image proportionally
to fit the projector's native resolution in
its horizontal or vertical width.
• Real: Projects an image as its original
resolution and resizes it to fit within
the display area. For input signals with
lower resolutions, the projected image
will be displayed in its original size.
• 4:3: Scales an image so that it is
displayed in the center of the screen
with a 4:3 aspect ratio.
• 16:9: Scales an image so that it is
displayed in the center of the screen
with a 16:9 aspect ratio.
• 16:10: Scales an image so that it is
displayed in the center of the screen
with a 16:10 aspect ratio.
2D Keystone Corrects any keystoning of the image. See Correcting keystone on page 16.
Auto Vertical
Keystone
Corner Fit See Adjusting Corner Fit on page 17.
Test Pattern
Adjusts the image size and focus and check that
the projected image is free from distortion.
15:9 picture
LW600ST+
LH600ST+
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture