BenQ LW600ST+ - Specifications; Projector Specifications

48 Specifications
Specifications
Projector specifications
All specifications are subject to change without notice.
Optical
Resolution
LW600ST+: 1280 x 800 WXGA
LH600ST+: 1920 x 1080 1080p
Display system
1-CHIP DMD
Lens
F = 2.6 ~ 2.78, f = 10.2 ~ 12.24 mm
Light source
LED
Electrical
Power supply
AC100–240V, 3.2 A, 50–60 Hz (Automatic)
Power consumption
320 W (Max); < 0.5 W (Standby)
Mechanical
Weight
2.65 Kg +
200 g (5.84 lbs + 0.44 lbs)
Output terminals
Speaker
10 watt x 1
Audio signal output
PC audio jack x 1
Control
USB
Type-A power supply 5V /1.5 A x 1
Type-A power supply 5V /1 A x 1 for WiFi dongle
RS-232 serial control
9 pin x 1
IR receiver x 2
Input terminals
Video signal input
SD/HDTV signal input
Digital - HDMI x 2
Environmental Requirements
Operating temperature
0°C–40°C at sea level
Operating relative humidity
10%–90% (without condensation)
Operating altitude
0–1500 m at 0°C–35°C
1501–3000 m at 0°C–30°C (with
High Altitude Mode on)
Storage temperature
-20°C–60°C at sea level
Storage humidity
10%–90% RH (without condensation)
Storage altitude
30°C@ 0~12,200m above sea level
Transporting
Original packing or equivalent is recommended
Repairing
Please visit below website and choose your country to
find your service contact window.
http://www.benq.com/welcome