BenQ MP523 - XGA DLP Projector User Manual

EN-1
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in residential installation.
This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, detectable by turning the equipment in question off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
 Reorient or relocate the receiving antenna
 Increase the distance between the equipment and the receiver
 Connect the equipment to an outlet on a different circuit than that which the receiver
is connected to
 Or consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference that may cause undesired operation.

BenQ MP523 - XGA DLP Projector Specifications

General

Resolution	XGA (1024x768)
Brightness	2500 ANSI Lumens
Projection Technology	DLP
Weight	2.6 kg
Input Ports	S-Video, Composite Video
Aspect Ratio	4:3
Zoom Ratio	1.1x
Projection Size	30 - 300 inches
Lamp Life	4000 hours (Economic mode)

Summary

FCC Compliance Notice

Safety Instructions

AC Power Cord Guidance

Introduction

Projector Features

Details the high-performance optical engine and user-friendly design of the projector.

Package Contents

Projector Overview

Front View

Illustrates and labels the front components of the projector, including lens, control panel, and feet.

Rear View

Illustrates and labels the rear components of the projector, including locks, power socket, and ports.

Bottom View

Illustrates and labels the bottom components of the projector, including ceiling mount and tilt feet.

Using the Product

Control Panel

Details the projector's control panel, including LED indicators and button functions for operation.

Connection Ports

Remote Control

Replacing the Battery

Remote Control Operation

Installation

Connecting the Projector

Guides users on how to connect various external devices like computers and video sources to the projector.

Powering On/Off the Projector

Adjusting the Projector

Adjusting Projection Image Size

Menu Operation

Picture Settings

Adjusts image parameters like brightness, contrast, color settings, keystone, aspect ratio, white intensity, and gamma.

Computer Image Settings

Configures settings related to computer input, including frequency, tracking, and horizontal/vertical position.

Video Image Settings

Adjusts video image parameters such as saturation, sharpness, and tint for optimal video playback.

Sound Settings

Manages audio settings, including volume control and muting the sound output.

General Settings

Covers projector settings like menu position, projection orientation, signal type, lamp hours, and power saving.

Option Settings

Includes options like blank screen, password protection, and Brilliant Color™ settings for enhanced image quality.

Language and Factory Default

Allows selection of the OSD menu language and restoration of all settings to factory defaults.

How to Operate Menus

Picture Settings Operation

Details how to adjust picture settings like brightness, contrast, color, and keystone within the OSD menu.

Computer Image Settings Operation

Explains how to adjust computer image settings like frequency, tracking, and position via the menu system.

Menu Operation Details

Video and Sound Settings Operation

Guides users on adjusting video image parameters and sound volume/mute settings through the menu.

General and Projection Settings Operation

Explains how to configure menu position, projection orientation, signal type, lamp hours, and power saving.

Advanced Menu Options

Advanced Operational Settings

Covers auto source selection, ECO mode, high altitude, OSD timeout, password, and language settings.

Factory Default and Brilliant Color

Explains how to restore factory defaults and the functionality of the Brilliant Color™ setting.

Maintenance

Cleaning the Lens and Housing

Provides instructions for gently cleaning the projector's lens and exterior housing using appropriate materials.

Replacing the Lamp

Specifications

Appendix

LED Indicator Messages

Explains the meaning of various status messages indicated by the Lamp, Temp, and Power LEDs.

Compatibility Modes

Troubleshooting

Start-up Problems

Addresses issues where the projector does not turn on, providing steps to check connections and power.

Image Problems

Helps resolve problems with image searching, focus, flickering, or instability by checking connections and settings.

Remote Control Problems

Provides solutions for when the remote control is not operating, focusing on obstructions and effective range.