BenQ MP514 User Manual

EN-1
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in residential installation.
This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, detectable by turning the equipment in question off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
 Reorient or relocate the receiving antenna
 Increase the distance between the equipment and the receiver
 Connect the equipment to an outlet on a different circuit than that which the receiver
is connected to
 Or consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference that may cause undesired operation.
http://www.pureglare.com.au

BenQ MP514 Specifications

General

Brand	BenQ
Model	MP514
Category	Projector
Language	English

Summary

FCC Compliance Notice

User Safety Instructions

Using the Product: Control Panel

Control Panel Button Functions

Detailed description of each button on the control panel and its function.

Using the Product: Remote Control

Remote Control Button Operations

Explanation of all buttons on the remote control and their functions.

Replacing the Battery

Battery Replacement Procedure

Battery Safety and Handling

Critical safety warnings for battery type, disposal, and handling to prevent hazards.

Installation Guide

Projector Cable Connections

Diagrams and instructions for connecting various video and control cables.

Powering On/Off the Projector

Projector Power-On Sequence

Steps to safely turn on the projector, including warm-up and source detection.

Projector Power-Off Sequence

Steps to safely turn off the projector, including cooling cycle and standby.

Critical Power Handling Warnings

Essential safety warnings for powering on/off, lens cap, and heat hazards.

Adjusting the Projector

Zoom and Focus Ring Operation

Adjusting Projection Image Size

Projection Distance and Screen Size Chart

Menu Operation and Settings

Picture and Image Settings

Configuration of Brightness, Contrast, Color, Keystone, Aspect Ratio, and Image presets.

Computer and Video Image Adjustments

How to Operate Menus

Navigating On-Screen Display (OSD)

Steps for opening, navigating submenus, and exiting the OSD menu system.

Detailed Picture Settings

In-depth explanation of Brightness, Contrast, Color Temperature, Keystone, and Aspect Ratio.

Detailed Menu Functions

Computer Image Timing and Position

Video Image Characteristics

Advanced Menu Options

Maintenance and Cleaning

General Maintenance and Servicing

Importance of lens cleanliness and seeking professional service for repairs.

Cleaning the Projector Lens

Gentle wiping of the projector lens using appropriate cleaning materials.

Cleaning the Projector Housing

Maintenance Safety Precautions

Essential safety warnings before performing any maintenance tasks.

Replacing the Lamp Precautions

Lamp Replacement Recommendation

When to consider replacing the projector lamp due to performance degradation.

Lamp Heat and Handling Hazards

Critical warnings about extreme lamp heat, glass handling, and explosion risks.

Lamp Lifetime and Usage Factors

Lamp Explosion Risk Factors

Understanding risks associated with vibration, shock, and lamp degradation.

Protective Gear and Usage Cycles

Flammable Materials and Atmosphere

Mercury Exposure Hazard

Information regarding mercury in the lamp and procedures in case of breakage.

Replacing the Lamp Procedure

Step-by-Step Lamp Replacement

Detailed instructions for safely removing and installing a new projector lamp module.

Lamp Replacement Safety Checks

Essential safety checks and warnings to ensure proper installation and prevent accidents.

Appendix: LED Indicator Messages

LED Indicator Status Meanings

Troubleshooting LED Statuses

Troubleshooting Common Issues

No Power or Start-up Problems

Resolving issues related to the projector not powering on or starting up.

Image Quality and Stability Issues

Troubleshooting steps for sourcing, focus, flickering, and unstable images.

Remote Control Malfunctions

Solutions for problems where the remote control fails to operate the projector.