BenQ MW516 User Manual (English)

Other manuals for BenQ MW516

Questions and Answers:

D
Drew HawkinsAug 11, 2025
How to fix a BenQ Projector that does not turn on?
- K
  Kathryn StanleyAug 11, 2025
  If your BenQ Projector isn't turning on, there could be a few reasons. First, ensure the power cord is securely plugged into both the projector's AC inlet and a working power outlet, and that the outlet switch is on, if applicable. Another possible cause is attempting to turn the projector on again too soon; you must wait until the cooling down process has completed before attempting to power it on again.
P
Peter LoweAug 19, 2025
Why is my BenQ MW516 Projector remote control not working?
- K
  Karl WongAug 19, 2025
  If your BenQ Projector remote control isn't working, it might be due to a few reasons. First, try replacing the battery with a new one. Also, ensure there are no obstacles between the remote control and the projector. Finally, make sure you are within 8 meters (26 feet) of the projector.
R
Russell MezaAug 26, 2025
What to do if my BenQ Projector has no picture?
- A
  April GreeneAug 26, 2025
  If your BenQ Projector is displaying no picture, several factors could be at play. First, verify that the video source is both turned on and correctly connected. Also, check that the projector is correctly connected to the input signal device. Ensure that you've selected the correct input signal using the SOURCE key on either the projector or the remote control. Finally, make sure the lens cover is open.
D
Danielle RiddleSep 2, 2025
How to fix blurred image on BenQ Projector?
- J
  James HamiltonSep 2, 2025
  If you're experiencing a blurred image with your BenQ Projector, consider these potential solutions. Begin by adjusting the focus of the lens using the focus ring. Next, ensure that the projector and the screen are properly aligned by adjusting the projection angle, direction, and the height of the unit if needed. Lastly, check that the lens cover is open.