What to do if there is no picture on my BenQ Projector?
If your BenQ Projector doesn't show a picture, first ensure that the video source is powered on and correctly connected. Check the connection between the projector and the input signal device. Select the correct input signal using the SOURCE key on the projector or remote. Finally, make sure the lens cover is open.
How to fix a BenQ MW712 that does not turn on?
If your BenQ projector does not turn on, ensure the power cord is securely plugged into both the projector's AC inlet and a working power outlet, and that the power outlet switch is on. Also, if the projector was recently turned off, wait for the cooling process to complete before attempting to turn it on again.
What to do if the BenQ MW712 remote control does not work?
If the remote control for your BenQ Projector isn't working, replace the battery with a new one. Ensure there are no obstructions between the remote and the projector. Also, make sure you are within 8 meters (26 feet) of the projector.
Why is the image on my BenQ Projector blurred?
If the image on your BenQ Projector is blurred, adjust the focus of the lens using the focus ring. Also, ensure that the projector and the screen are properly aligned by adjusting the projection angle, direction, and height if needed. Make sure that the lens cover is open.
To Next Page
General
