How to fix a BenQ MW814ST that does not turn on?
If your BenQ Projector does not turn on, ensure the power cord is correctly plugged into both the projector's AC power jack and the power outlet, and that the outlet switch is on, if applicable. Also, if the projector is cooling down, wait until the process is complete before attempting to turn it on again.
Why is my BenQ MW814ST remote control not working?
If the remote control for your BenQ Projector isn't working, first replace the battery with a new one. Then, make sure there are no obstructions between the remote and the projector. Finally, ensure you are within 8 meters (26 feet) of the projector.
What to do if my BenQ MW814ST has no picture?
If your BenQ Projector shows no picture, ensure the video source is on and correctly connected. Verify the projector is properly connected to the input signal device. Select the correct input signal using the SOURCE key on the projector or remote. Also, make sure the lens cover is open.
How to fix blurred image on BenQ MW814ST?
If the image from your BenQ Projector is blurred, adjust the focus of the lens using the focus ring. Also, adjust the projection angle, direction, and height of the projector to properly align it with the screen. Ensure the lens cover is open.
Explains the projector's control panel buttons and their functions.
Details the functions of the remote control buttons.
Explains how to connect various video and audio sources to the projector.
Guides on powering on, adjusting image angle, focus, and clarity.
Procedure for safely powering off the projector.
Information on lamp life, replacement timing, and resetting the timer.
Addresses problems like no power, no picture, blurred image, and remote control issues.
To Next Page
General
