BenQ MW817ST - User Manual

Questions and Answers

J
Julie SheppardAug 11, 2025
How to fix BenQ Projector that does not turn on?
- M
  Michael WatsonAug 11, 2025
  If your BenQ projector isn't turning on, consider these potential causes: * **Power Cord Issues:** Ensure the power cord is securely plugged into both the projector's AC power jack and a functioning power outlet. If the outlet has a switch, make sure it's switched on. * **Cooling Process:** If you've recently turned the projector off, wait until the cooling down process is complete before attempting to turn it on again.
J
jonathandavisAug 18, 2025
Why is my BenQ MW817ST Projector image blurred and how to fix it?
- M
  Miss Lacey Arroyo MDAug 18, 2025
  A blurred image on your BenQ projector can be caused by a few things. First, adjust the focus of the lens using the focus ring. Second, make sure that the projector and the screen are aligned properly, adjusting the projection angle, direction, and height if needed. Finally, ensure the lens cover is open.
M
michelle05Aug 26, 2025
What to do if the BenQ Projector remote control does not work?
- C
  Chelsea CruzAug 26, 2025
  If your BenQ projector's remote control isn't working, try these solutions: * **Battery:** Replace the battery with a new one. * **Obstacles:** Remove any obstacles between the remote control and the projector. * **Distance:** Ensure you are within 8 meters (26 feet) of the projector.
J
Jonathan KellySep 2, 2025
What to do if my BenQ MW817ST has no picture?
- I
  Ian MolinaSep 2, 2025
  If your BenQ Projector isn't displaying a picture, here are a few things to check: * Make sure the video source is turned on and the signal cable is correctly connected. * Verify the projector is correctly connected to the input signal device. * Select the correct input signal using the SOURCE key on the projector or remote. * Ensure the lens cover is open.