BenQ MW663 User Manual

MX662/MW663
Digital Projector
User Manual

BenQ MW663 Specifications

General

Native aspect ratio	16:10
Projection distance	- m
Vertical scan range	23 - 120 Hz
Horizontal scan range	31 - 102 kHz
Projection technology	DLP
Contrast ratio (typical)	13000:1
Screen size compatibility	44 - 300 \
Projector native resolution	WXGA (1280x800)
Offset	120 %
Focal length range	16.9 - 21.9 mm
Aperture range (F-F)	2.6 - 2.9
Lamp power	210 W
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	5000 h
Full HD	No
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL, SECAM
RMS rated power	2 W
Number of built-in speakers	1
USB connector type	USB Type-A
Serial interface type	RS-232
USB 2.0 ports quantity	2
VGA (D-Sub) ports quantity	3
Component video (YPbPr/YCbCr) in	0
Connectivity technology	Wired
Noise level	32 dB
Preset modes	Cinema, Dynamic, Presentation, sRGB
Noise level (economic mode)	28 dB
Product color	Black, Silver
Market positioning	Business
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	303 W
Cables included	AC, VGA

Weight and Dimensions

Depth	244 mm
Width	312 mm
Height	104 mm
Weight	2750 g

Summary

Important Safety Instructions

General Safety Guidelines

Essential precautions for safe operation, handling, and future reference.

Electrical and Environmental Precautions

Guidelines for power supply, voltage stability, ventilation, and environmental considerations.

Additional Safety Instructions

Lamp and Equipment Handling Safety

Details on lamp cooling, lamp life, and warnings against disassembling the projector.

Environmental and Placement Safety

Environmental Restrictions

Avoidance of specific environments like poorly ventilated, humid, dusty, or extreme temperature/altitude locations.

Placement and Ventilation Guidelines

Instructions on proper placement, avoiding ventilation blockage, and using stable surfaces.

Mounting and Handling Safety

Physical Handling and Mounting Precautions

Do not step on projector, avoid liquids, ensure grounding, and follow ceiling mount safety.

Ceiling Mounting Recommendations

Use BenQ mount kits, ensure secure installation, and use safety cables.

Introduction to the Projector

Key Projector Features

Highlights SmartEco, ECO BLANK, filter-free design, one-key auto-adjustment, built-in speaker, and 3D support.

Shipping Contents and Accessories

Standard Accessories

Lists the items included in the projector package for your region.

Optional Accessories

Lists additional items available for purchase, like spare lamps and mount kits.

Projector Exterior View

Front and Upper Side Components

Identifies external controls and ports on the front and top of the projector.

Rear and Lower Side Components

Details the various input/output ports and slots on the back and bottom.

Projector Controls and Functions

On-Projector Controls

Explains the functions of buttons like Focus, Zoom, Power, Menu, and indicator lights.

Remote Control Functions

Remote Control Buttons

Details the purpose of each button on the remote, including navigation and special functions.

Remote Control Usage

Operating Range and Battery Replacement

Specifies the effective range and provides instructions for replacing remote control batteries.

Positioning Your Projector

Installation Location Options

Describes four installation positions: Front Table, Front Ceiling, Rear Ceiling, and Rear Table.

Image Size and Projection

Projection Dimensions and Sizing

Provides charts for calculating screen size, projection distance, and vertical offset.

MW663 Image Size and Projection

Projection Dimensions for MW663

Details projection distance and vertical offset for various screen sizes for the MW663 model.

Connecting the Projector

Signal Connection Methods

Explains how to connect video and audio sources using various cables like VGA, HDMI, and USB.

Video Source Connection

Connecting Video and Audio Sources

Details connection methods and audio capabilities of the projector.

Projector Operation

Starting Up the Projector

Step-by-step guide for powering on the projector, selecting language, and initial setup.

Adjusting the Projected Image

Projection Angle and Auto Adjustment

Instructions for adjusting projection angle, height, and using the auto-adjustment feature.

Image Size and Clarity Tuning

Guidance on using the zoom ring for size and focus ring for sharpness.

Correcting Image Distortion

Keystone Correction

Methods for correcting trapezoidal image distortion using the remote or OSD menu.

Using the On-Screen Display (OSD) Menus

OSD Menu Navigation and Language Setup

Explains how to navigate OSD menus and set the display language.

Securing the Projector

Security Features: Cable Lock and Password

Details on using a security cable and setting up a password for unauthorized access prevention.

Password Management

Password Procedures: Recall, Change, Disable

Instructions for password recall, changing it, and disabling the password protection feature.

Input Signal and Color Settings

Selecting Input Sources and Color Space

Guide to switching between input signals and adjusting color space via HDMI.

Image Magnification and Aspect Ratio

Zooming, Panning, and Aspect Ratio Selection

How to magnify images, navigate them, and adjust aspect ratios for optimal display.

Understanding Aspect Ratios

Aspect Ratio Modes Explained

Detailed explanation of Auto, Real, 4:3, 16:9, and 16:10 aspect ratio settings.

Optimizing Image Quality

Wall Color and Picture Modes

Adjusting wall color correction, selecting preset picture modes, and customizing User modes.

Fine-Tuning Image Settings

Adjusting Image Parameters

Detailed adjustments for brightness, contrast, color, tint, sharpness, and brilliant color settings.

Color Temperature Selection

Options for Cool, Normal, and Warm color temperatures to adjust white balance.

Advanced Color and 3D Settings

Color Temperature Fine Tuning

Fine-tuning R/G/B gain and offset for precise color temperature adjustment.

3D Color Management

Adjusting primary colors, hue, and saturation for accurate 3D color reproduction.

Presentation Timer and Picture Reset

Setting Presentation Timer

Configuring the timer display, position, counting direction, and sound reminders for presentations.

Resetting Picture Settings

Options to reset current or all picture modes to factory defaults.

Advanced Operation Features

Remote Paging and Image Freeze

Using remote paging via USB and freezing the projected image.

Special Operation Modes

Blanking Image and Locking Controls

Hiding the image with ECO BLANK and locking projector control keys.

High Altitude Operation

Guidelines for operating the projector in high altitude environments.

Audio and Test Pattern

Adjusting Sound Settings

Muting sound, adjusting volume level, and disabling the power on/off ring tone.

Using the Test Pattern

Displaying a grid test pattern for image size, focus, and distortion checks.

Teaching Templates

Utilizing Preset Teaching Patterns

How to activate and use whiteboard and blackboard patterns for teaching purposes.

Presenting from USB Reader

Image Slideshow and Navigation

Using a USB drive for image slideshows, viewing thumbnails, and navigating during playback.

Shutting Down the Projector

Standard and Direct Power Off Procedures

Steps for properly shutting down the projector and the implications of direct power disconnection.

Menu System Overview

OSD Menu Structure and Options

Explains the main menus (Display, Picture, Source) and their available sub-menus and options.

System Setup: Basic Menu

Basic System Settings Configuration

Covers presentation timer, language, projector installation, and general menu settings.

System Setup: Advanced Menu

Advanced System Settings

Configuration for high altitude mode, audio, lamp, security, test patterns, and network settings.

Menu Function Descriptions

Display Menu Functions

Detailed explanation of Wall Color, Aspect Ratio, Keystone, Position, Phase, H. Size, Digital Zoom, 3D.

Picture Menu Functions

Picture Mode and Color Adjustments

Details on Picture Mode, Reference Mode, Brightness, Contrast, Color, Tint, Sharpness, Brilliant Color, Color Temperature.

Source and Basic Setup Menu Functions

Source and Basic System Setup

Descriptions for Quick Auto Search, Color Space, Presentation Timer, Language, and Projector Installation.

Operation Settings Menu Functions

Operational Settings Configuration

Covers Direct Power On, Signal Power On, Auto Power Off, Quick Cooling, Instant Restart, Blank Timer, Sleep Timer.

Advanced Setup Menu Functions

Advanced System Settings Details

Explains High Altitude Mode, Audio, Lamp, Security, Test Pattern, and Closed Caption settings.

Standby and Network Settings

Standby, Network, and Reset Functions

Details on standby settings, network configuration, and resetting all settings to factory defaults.

Information Menu Functions

Current System Status Display

Shows current signal source, picture mode, resolution, lamp mode, 3D format, color system, lamp hours, and firmware.

Projector Maintenance

Cleaning and Care

Instructions for cleaning the projector lens and case, and general care advice.

Storage and Handling

Guidelines for storing the projector for extended periods and transporting it.

Lamp Information and Life Extension

Lamp Hour Monitoring

How to check the projector's total lamp usage hours.

Maximizing Lamp Lifespan

Tips for extending lamp life, including setting Lamp Mode and Auto Power Off.

Lamp Replacement Timing

Lamp Warning Indicators and Messages

Information on lamp warning lights and messages indicating the need for replacement.

Replacing the Projector Lamp

Lamp Replacement Procedure: Part 1

Steps for safely disconnecting power, cooling, and removing the lamp cover and old lamp.

Lamp Replacement Procedure: Part 2

Installing New Lamp and Resetting Timer

Instructions for installing the new lamp, securing components, and resetting the lamp timer.

Indicator Lights and Status

Interpreting Indicator Lights

Explanation of light indicators (Power, Temp, Lamp) and their meanings for power, thermal, and lamp events.

Troubleshooting Common Issues

Power, Picture, and Remote Control Problems

Solutions for projector not turning on, no picture, blurred image, and non-functional remote control.

Password and Other Issues

Guidance on forgotten passwords and other troubleshooting scenarios.

Projector Specifications

Optical, Electrical, and Mechanical Specs

Details on resolution, display system, lamp, power, consumption, weight, and output terminals.

Input Terminals and Environmental Requirements

Lists input terminals, control interfaces, operating temperature, humidity, and altitude.

Dimensions and Mounting

Projector Dimensions

Physical dimensions of the projector unit.

Ceiling Mount Installation Details

Diagrams and specifications for mounting the projector on a ceiling.

Timing Charts

Supported PC Input Timings

Table listing resolutions, modes, and frequencies supported for PC input.

Supported Timing for HDMI Input

HDMI Input Timing Specifications

Details supported resolutions and timings for HDMI input, including 3D signals.

Supported Timing for Video Inputs

Component, Video, and S-Video Timings

Lists supported timings for Component, Video, and S-Video inputs, including color sub-carrier frequencies.

Warranty and Copyright Information

Limited Warranty Terms

Details BenQ's warranty policy, terms, and conditions for the projector.

Copyright, Disclaimer, and Patents

Information on publication copyright, disclaimers, and patents covering the projector technology.