Introduction 11
Remote control
1. POWER
Toggles the projector between standby
mode and on.
2. Info
Shows the status information of the
projector.
3. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD
menu, exits and saves menu settings.
4. Left
5. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen
Display (OSD) menu item.
6. ECO BLANK
Used to hide the screen picture.
7. Keystone/Arrow keys ( / Up,
/Down)
Manually corrects distorted images
resulting from an angled projection.
8. SmartEco
Displays the lamp mode selection bar
(Normal/Economic/SmartEco).
9. Aspect
Selects the display aspect ratio.
10. Page Up/Page Down
Operate your display software program (on a
connected PC) which responds to page up/
down commands (like Microsoft PowerPoint).
11. Digital Zoom (+, -)
Magnifies or reduces the projected picture size.
12. Timer On
Activates or displays an on-screen timer based
on your own timer setting.
13. Timer Set up
Enters presentation timer setting directly.
14. 3D settings
Enters 3D setting directly.
15. AUTO
Automatically determines the best picture
timings for the displayed image.
16. Right
When the On-Screen Display (OSD) menu is
activated, the #4, #7, and #16 keys are used as
directional arrows to select the desired menu
items and to make adjustments.
17. SOURCE
Displays the source selection bar.
18. Volume +/-
Adjusts the sound level.
19. Mute
Toggles projector audio between on and
off.
20. Freeze
Freezes the projected image.
21. Test
Displays the test pattern.
22. CC
Displays the video term description on screen
which is provided for hard-of-hearing viewers.
23. Teaching template
Enters Teaching template setting directly.
2
3
4
8
9
11
12
13
15
17
18
19
20
21
23
22
16
7
14
10
6
5
7
1
Downloaded From projector-manual.com BenQ Manuals
To Next Page
Loading...
