What to do if my BenQ MX825STH has no picture?
If your BenQ Projector shows no picture, here are a few things to check: * Ensure the video source is turned on and the signal cable is correctly connected. * Verify the projector is correctly connected to the input signal device. * Select the correct input signal using the SOURCE key. * Make sure the lens cover is open.
How to fix a BenQ Projector that does not turn on?
If your BenQ Projector doesn't turn on: * Ensure the power cord is correctly plugged into both the projector's AC power jack and a working power outlet. If the outlet has a switch, make sure it's on. * If you've recently turned the projector off, wait until the cooling down process is completed before attempting to turn it on again.
Why is my BenQ Projector remote control not working?
If the remote control for your BenQ Projector isn't working: 1. Replace the batteries with new ones. 2. Ensure there are no obstructions between the remote control and the projector. 3. Make sure you are within 8 meters (26 feet) of the projector.
How to fix a blurred image on a BenQ MX825STH Projector?
If the image on your BenQ Projector is blurred: * Adjust the focus of the lens using the focus ring. * Adjust the projection angle, direction, and height of the projector to properly align it with the screen. * Ensure the lens cover is open.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Display Technology | DLP |
| Speaker | 10W |
| Noise Level | 33 dBA (Normal) / 29 dBA (Eco) |
| Power Consumption (Standby mode) | 0.5W |
| Connectivity | VGA, HDMI, USB, RS-232, Audio In/Out |
To Next Page
