How to fix a BenQ MX808ST Projector that won't turn on?
If your BenQ projector isn't turning on: * Ensure the power cord is securely plugged into both the projector's AC power jack and a functioning power outlet. If the outlet has a switch, make sure it's on. * If you've recently turned the projector off, wait for the cooling process to complete before attempting to turn it on again.
What to do if the BenQ MX808ST remote control does not work?
If your BenQ projector's remote control isn't working, try these solutions: * Replace the batteries with new ones. * Make sure there are no obstacles blocking the path between the remote control and the projector. * Ensure you are within 8 meters (26 feet) of the projector.
What to do if my BenQ MX808ST Projector has no picture?
If your BenQ projector isn't displaying a picture, there are several potential causes: * Ensure the video source is turned on and the signal cable is correctly connected. * Verify the projector is correctly connected to the input signal device. * Select the correct input signal using the SOURCE key. * Make sure the lens cover is open.
How to fix a blurred image on a BenQ MX808ST?
If the image on your BenQ projector appears blurred: 1. Adjust the focus of the lens using the focus ring until the image becomes clear. 2. Ensure the projector and screen are properly aligned. Adjust the projection angle, direction, and height of the projector as needed. 3. Confirm that the lens cover is open.
General| Display Technology | DLP |
|---|---|
| Native Resolution | XGA (1024 x 768) |
| Contrast Ratio | 13000:1 |
| Aspect Ratio | 4:3 |
| Throw Ratio | 0.61 |
| Lamp Life (Normal) | 4000 hours |
| Lamp Life (SmartEco) | 7000 hours |
| Input Lag | 16 ms |
| Speaker | 10W |
| Lamp Life (Eco) | 10000 hours |
| Interfaces | HDMI, VGA, USB, Audio in/out |
| Keystone Correction | Vertical ±40 degrees |
| Noise Level | 33 dB (Eco mode) |
Covers reading manual, lens safety, servicing, and lamp handling.
Addresses power stability, blocking lens, and lamp life considerations.
Factors for placement and ceiling/wall mounting.
Advises on BenQ kits, security, and installation risks.
General connection procedures, diagrams, and cable usage.
Step-by-step power-on procedure and input signal detection.
Introduces the OSD menu structures and navigation.
Using cable locks and setting up password protection.
Procedures for turning off the projector.
Detailed picture modes and user setting customization.
Instructions for cleaning the lens/case and storing the projector.
Checking usage time and prolonging lamp life.
When and how to replace the projector lamp.
Safety warnings and preparation before changing the lamp.
Detailed procedure for removing the old lamp and installing a new one.
Procedure to reset the lamp timer after replacement.
Solutions for projector not turning on, no picture, or remote problems.
Fixing blurred images and incorrect password entries.
To Next Page
