Important Safety Instructions2
Safety Instructions
1. The lamp becomes extremely hot dur-
ing operation. Allow the projector to
cool for approximately 45 minutes
prior to removing the lamp assembly
for replacement.
2. Do not operate lamps beyond the
rated lamp life. Excessive operation of
lamps beyond the rated life could
cause them to explode on rare occa-
sions.
3. Never replace the lamp assembly or
any electronic components unless the
projector is unplugged.
4. Do not place this product on an
unstable cart, stand, or table. The
product may fall, sustaining serious
damage.
5. To reduce the risk of electric shock, do
not disassemble this appliance. Take it
to a qualified technician when service
or repair is required. Incorrect reas-
sembly can cause cause malfunction
of the projector or electric shock when
the appliance is subsequently used.
6. This product is capable of displaying
inverted images for ceiling mount
installation. Please use BenQ’s Ceiling
Mounting Kit for mounting the unit
and ensure it is securely installed.
To Next Page
Loading...
