BenQ SU917 - Technical Specifications Overview; Optical Specifications; Electrical Specifications; Mechanical Specifications

11
All specifications are subject to change without notice.
Lamp life results will vary depending on environmental conditions and usage.
Optical
Resolution
1920 x 1200 WUXGA
Display system
1-CHIP DMD
Lens F/Number
F= 2.42~2.95
f= 20.77mm~31.13mm
Offset
120%~145%
Zoom ratio
1.5X
Lamp
340 W lamp
Electrical
Power supply
AC100–240V, 4.
5A,
50-60 Hz (Automatic)
Power consumption
400W (Max.); < 0.5 W; < 6 W (when the
Network function in the Standby Settings
is on)
Mechanical
Weight
3.7 kg (8.2 lbs.)
Output terminals
RGB output
D-Sub 15-pin (female) x 1
Speaker
(Stereo) 10 watt x 1
Audio signal output
PC audio jack x 1
12V Trigger (screen control)
Control
RS-232 serial control
9 pin x 1
LAN control
Wire (RJ45)
Wireless (USB type A)
IR receiver x 2
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 2
Video signal input
S-VIDEO
Mini DIN 4-pin port x 1
VIDEO
RCA jack x 1
SD/HDTV signal input
Analog - Component RCA jack x 3
(through RGB input)
Digital-HDMI x 2 (1 for MHL input)
Audio signal input
Audio in
PC audio jack x 1 for audio input
PC audio jack x 1 for microphone
audio input
RCA audio jack (L/R) x 2
USB type A x 2
Supports photo viewer & multimedia
&1.5A charger
USB mini B x 1
Supports USB display
Environmental Requirements
Operating temperature
0°C-40°C at sea level
Operating relative humidity
10%-90% (without condensation)
Operating altitude
0-1499 m at 0°C-35°C
1500-3000 m at 0°C-30°C (with High
Altitude Mode on)
Specifications
(EN)
BenQ QSG-SU917.book Page 11 Tuesday, November 11, 2014 3:36 PM