BenQ SH940 - User Manual

Other manuals for BenQ SH940

Datasheet2 pages

Questions and Answers

S
smithjasminJul 26, 2025
What to do if my BenQ SH940 does not turn on?
- J
  John JamesJul 26, 2025
  If your BenQ Projector doesn't turn on, there might be a few reasons: * Check the power cable: Ensure it's properly plugged into both the AC inlet on the projector's rear and the power outlet. If the outlet has a switch, verify it's on. * Cooling process: If you've recently turned the projector off, wait for the cooling process to complete before attempting to turn it on again. * Lamp cover: Make sure the lamp cover is securely attached.
J
Juan HernandezAug 1, 2025
How to fix a BenQ Projector with no picture?
- R
  Rebecca BrooksAug 2, 2025
  If your BenQ Projector displays no picture, consider these potential causes: * Video source: Ensure the video source is turned on and the signal cable is correctly connected. * Input source device connection: Verify that the projector is correctly connected to the input source device. * Input source selection: Use the Source keys on the remote control or the SOURCE button on the projector to select the correct input source.
L
Lacey WoodAug 7, 2025
Why is my BenQ SH940 remote control not working?
- L
  Linda MendozaAug 7, 2025
  If your BenQ Projector remote control isn't working correctly, here are a few things to check: * Batteries: Replace both batteries with new ones. * Obstacles: Make sure there is no obstacle between the remote control and the projector. * Distance: Ensure you are within 8 meters (26.2 feet) of the projector.
T
Tiffany Rodriguez DVMAug 13, 2025
How to fix blurred picture on BenQ SH940 Projector?
- R
  Rachel SmithAug 13, 2025
  If the picture on your BenQ Projector is blurred: * Focus: Adjust the focus of the lens using the focus ring. * Alignment: Adjust the projection angle and direction, as well as the height of the projector, if necessary, to ensure proper alignment with the screen.
N
nicholas31Aug 19, 2025
What to do if BenQ Projector image is unstable?
- J
  Justin ReedSep 12, 2025
  If the image on your BenQ Projector is unstable, the connection cables might not be securely connected to the projector or the signal source. Ensure that you correctly connect the cables to the appropriate terminals.

Summary

Important Safety Instructions

Overview

Shipping Contents

Lists all items included in the projector package for verification.

Remote Control Setup

Covers battery installation and operation of the remote control.

Projector Features

Highlights key capabilities such as Full HD compatibility and high brightness.

Projector Exterior View

Identifies and labels external ports and controls on the projector.

Controls and Installation

Control Panel Functions

Explains the buttons and indicators on the projector's physical control panel.

Remote Control Functions

Details the operation of each button on the remote control.

Positioning the Projector

Guides on selecting the optimal placement and orientation for the projector.

Connecting Equipment

Guides on connecting various video sources and computers to the projector.

Using the Projector

Initial Operation

Steps for preparing and turning on the projector for the first time.

Selecting Input Source

How to choose the active video or PC input signal for display.

Menu Navigation

Guide to using the projector's On-Screen Display (OSD) menus for adjustments.

Image Adjustment

Guides on adjusting image quality, clarity, and picture modes.

Sound Adjustment

Controls for muting, adjusting volume, and sound quality settings.

Advanced Features and Information

Network Control

Instructions for configuring and using LAN control for remote management.

Lamp Information

Details on lamp life, replacement timing, and resetting the lamp timer.

Troubleshooting

Provides solutions for common projector problems and issues.

Specifications

Technical details, dimensions, and compatibility information of the projector.

Warranty and Copyright

BenQ SH940 Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:9
Projection distance	- m
Vertical scan range	23 - 85 Hz
Horizontal scan range	31 - 92 kHz
Projection technology	DLP
Contrast ratio (dynamic)	50000:1
Contrast ratio (typical)	-
Screen size compatibility	28 - 300 \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	± 30 °
Throw ratio	1.62 - 2.43:1
Focal length range	24.1 - 36.15 mm
Aperture range (F-F)	2.48 - 2.81
Lamp power	300 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
3D	No
Full HD	Yes
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 640 x 480 (VGA)
RMS rated power	10 W
Number of built-in speakers	1
HDMI version	1.3
Audio (L/R) in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	36 dB
Preset modes	Cinema, Custom, Dynamic, Presentation, sRGB
Noise level (economic mode)	33 dB
On Screen Display (OSD) languages	ARA, CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, KOR, POL, SWE, TUR
Placement	Ceiling
Product type	Standard throw projector
Product color	Black
Market positioning	Business
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	442 W
Cables included	VGA