BenQ SW916 User Manual (English)

Other manuals for BenQ SW916

Questions and Answers:

P
Parker McguireAug 10, 2025
Why BenQ Projector remote control does not work?
- D
  Deborah McintyreAug 11, 2025
  If your BenQ Projector remote control isn't working, it could be due to several reasons. First, the battery might be out of power, so try replacing it with a new one. Second, there might be an obstacle between the remote control and the projector; make sure to remove any obstructions. Finally, you might be too far away from the projector. Ensure you are standing within 7 meters (23 feet) of the projector.
J
Julia GreenAug 18, 2025
How to fix BenQ SW916 Projector that does not turn on?
- C
  Cheryl WashingtonAug 18, 2025
  If your BenQ Projector doesn't turn on, start by checking the power supply. Ensure the power cord is plugged into the AC inlet on the projector and the power outlet, and that the power outlet switch is on. Also, if you've recently turned it off, wait until the cooling down process has completed before attempting to turn it on again.
R
Russell StoneAug 26, 2025
What to do if my BenQ SW916 has no picture?
- L
  Linda WhiteAug 26, 2025
  If your BenQ Projector displays no picture, there are a few potential causes. Ensure that the video source is turned on and that the signal cable is correctly connected. Verify that the projector is correctly connected to the input signal device. Also, make sure the correct input signal is selected using the SOURCE key on the projector or remote control.
P
Paul PerezSep 2, 2025
How to fix a blurred image on BenQ SW916?
- D
  dominguezkarenSep 2, 2025
  If you're experiencing a blurred image on your BenQ Projector, try these solutions: First, adjust the focus of the lens using the focus ring. Second, adjust the projection angle, direction, and height of the unit to ensure proper alignment between the projector and the screen. Lastly, make sure the lens cover is open.