BenQ TH671ST - Using the On-Screen Display (OSD) Menus; Basic OSD Menu Overview; Advanced OSD Menu Overview; Switching Between Basic and Advanced Menus

21 Operation
Using the menus
The projector is equipped with 2 types of On-Screen Display (OSD) menus for making various
adjustments and settings.
• Basic OSD menu: provides primary menu functions. (See Basic menu on page 27)
• Advanced OSD menu: provides full menu functions. (See Advanced menu on page 30)
To access the OSD menu, press MENU on the projector or remote control.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu items.
• Use OK on the projector or remote control to confirm the selected menu item.
The first time you use the projector (after finishing the initial setup), Basic OSD menu displays.
Below is the overview of the Basic OSD menu.
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow the
instructions below:
1. Go to Basic Menu - Settings > Menu Type and press OK.
2. Press / to select Advanced and press OK. Your projector will switch to Advanced OSD
menu.
Below is the overview of the Advanced OSD menu.
The OSD screenshots below are for reference only, and may differ from the actual design.
• Input signal connected • No input signal connected
Picture Mode
Vivid TV
Sound Mode
Standard
Volume
10
Mute
Off
3D Mode
3D Off
3D Sync Invert
Press OK
Settings
Press OK
Fast Mode
Off
Wall Color
Off
Auto Source
Off
Reset Lamp Timer
Projector Position
Front
Menu Type
Basic
Reset All Settings
Test Pattern
Off
HDMI Range
Auto
Information
Picture Mode
User Mode Management
Brightness
Contrast
Tint
Sharpness
Picture
7
PC
Vivid TV
Exit
Current input source
Main menu icon
Main menu name
Submenu
Press BACK to go back to
the previous window or to
exit.
Status
50
50
50
50
Color
Advanced...
Reset Current Picture Mode
Selection bar