BenQ TH671ST - Page 29

29 Menu operation
• Reset Lamp
Timer
Activate this function only after a new lamp is installed. When you select Reset, a
"Reset Successfully" message displays to notify that the lamp time has been reset
to "0".
• Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Picture, Keystone, Language, Projector
Position, Menu Type, Password, Key Lock, Reset Lamp Timer, and High Altitude
Mode.
• Information
Displays the following information about your projector.
• Source: Displays the current signal source.
• Picture Mode: Displays the current Picture Mode.
• Resolution: Displays the native resolution of the input source.
• Color System: Displays input system format.
• Lamp Usage Time: Displays the number of hours the lamp has been used.
• 3D Format: Displays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
• Firmware Version: Displays the firmware version of your projector.
Some information is given only when certain input sources are in use.