37 Menu operation
Information
LED Indicator
When you select On, all LED indicators on the projector function normally. See
Indicators for more details.
When you select Off, the LED indicators are off after you turn on the projector and
the splash screen displays. However, if the projector is not working properly, the
LED indicators light or flash to remind you that a problem may occur. See also
Indicators for more details.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Picture, Keystone, Language, Projector Position,
Menu Type, Password, Key Lock, Reset Lamp Timer, and High Altitude Mode.
Information
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Resolution: Displays the native resolution of the input source.
• Color System: Shows input system format.
• Lamp Usage Time: Shows the number of hours the lamp has been used.
• 3D Format: Shows the current 3D mode.
• Firmware Version: Shows the firmware version of your projector.
To Next Page
Loading...
