BenQ TH690ST - Page 53

53 Specifications
Color Calibration
(only for service)
(Continued)
Write Set Blue Offset value <CR>*BOffset=value#<CR>
Read Get Blue Offset value <CR>*BOffset=?#<CR>
Write Primary Color <CR>*primcr=value#<CR>
Read Primary Color Status <CR>*primcr=?#<CR>
Write Set Hue value <CR>*hue=value#<CR>
Read Get Hue value <CR>*hue=?#<CR>
Write Set Saturation value <CR>*saturation =value#<CR>
Read Get Saturation value <CR>*saturation =?#<CR>
Write Set Gain value <CR>*gain=value#<CR>
Read Get Gain value <CR>*gain=?#<CR>
Service
(Only for service)
Write Service mode enable for error report <CR>*error=enable#<CR>
Read Error code report <CR>*error=report#<CR>
Read FAN 1 speed <CR>*fan1=?#<CR>
Read FAN 2 speed <CR>*fan2=?#<CR>
Read FAN 3 speed <CR>*fan3=?#<CR>
Read Temperature 1 <CR>*tmp1=?#<CR>
Read LED indicator <CR>*led=?#<CR>