How to fix BenQ Projector that does not turn on?
If your BenQ Projector doesn't turn on, first ensure the power cord is securely plugged into both the projector's AC power jack and a working power outlet, checking that the outlet switch is on. Also, if the projector is cooling down, wait for the process to complete before attempting to power it on again.
Why my BenQ Projector does not turn on?
If your BenQ Projector is not turning on, it could be due to the following reasons: * There's no power from the power cord. Make sure the power cord is plugged into the AC power jack on the projector and into a working power outlet. If the power outlet has a switch, ensure it is switched on. * You're attempting to turn the projector on again during the cooling process. Wait until the cooling down process has completed.
What to do if my BenQ Projector has no picture?
If you have no picture on your BenQ Projector, make sure the video source is turned on and correctly connected. Check the connection between the projector and the input signal device. Select the correct input signal using the SOURCE key on the projector or remote control. Finally, ensure the lens cover is open.
How to fix blurred image on BenQ TS521P?
If you're experiencing a blurred image with your BenQ Projector, try these steps: 1. Adjust the focus of the lens using the focus ring. 2. Adjust the projection angle, direction, and height of the projector to properly align it with the screen. 3. Ensure the lens cover is open.
Why does not BenQ Projector remote control work?
If the remote control for your BenQ Projector isn't working, try the following: * Replace the battery with new ones. * Remove any obstacles between the remote control and the projector. * Ensure you are within 8 meters (26 feet) of the projector.
How to fix a BenQ TS521P remote control that is not working?
If the remote control for your BenQ Projector isn't working, consider these possible causes: * The battery is out of power. Replace the battery with new ones. * There is an obstacle between the remote control and the projector. Remove the obstacle. * You are too far away from the projector. Move closer, standing within 8 meters (26 feet) of the projector.
How to fix a blurred image on a BenQ TS521P Projector?
If the image from your BenQ Projector appears blurred, here are a few things to check: * The projection lens is not correctly focused. Adjust the focus of the lens using the focus ring. * The projector and the screen are not aligned properly. Adjust the projection angle and direction, as well as the height of the projector if necessary. * The lens cover is still closed. Open the lens cover.
General| Lamp Life (Normal) | 4000 hours |
|---|---|
| Lamp Life (Eco) | 10000 hours |
| Weight | 2.3 kg |
| Display Technology | DLP |
| Input Lag | 16 ms |
| Projection Size | 30 - 300 inches |
| Power Consumption (Standby) | <0.5W |
| Contrast Ratio | 13000:1 |
| Throw Ratio | 1.15 - 1.5 |
| Keystone Correction | Vertical ±40° |
| Inputs | HDMI, VGA |
| Outputs | Audio out |
To Next Page
